|
i'm noob to the 6100, and have had no trouble getting it all set up with latest version of the xiegu FW.
yes the decoder isnt perfect, but most arent, so its just best to rely on the decoder between our ears IMHO.
--
72's de k8zf, randy
|
Okay, Oleg. Please take the time to get it correct. We can wait.
Enjoy life, Greg
Live Well, Laugh Often, Love Much!
toggle quoted message
Show quoted text
On 2/6/24 02:09, Oleg - R1CBU wrote: On Mon, Feb 5, 2024 at 10:58 PM, Gregory Majewski wrote:
Please let us know when more details on it are available and how to
order/pre-order one. I know the firmware will be good.
Now it’s difficult to say when it will be ready. Hardware development is progressing very quickly, and the firmware is 90% ready. Let's see how things go further
|
On Mon, Feb 5, 2024 at 10:58 PM, Gregory Majewski wrote:
Please let us know when more details on it are available and how to order/pre-order one. I know the firmware will be good.
Now it’s difficult to say when it will be ready. Hardware development is progressing very quickly, and the firmware is 90% ready. Let's see how things go further
|
Please let us know when more details on it are available and how to order/pre-order one. I know the firmware will be good.
Enjoy life, Greg KD1XI
Live Well, Laugh Often, Love Much!
toggle quoted message
Show quoted text
On 2/5/24 08:20, Oleg - R1CBU wrote: On Mon, Feb 5, 2024 at 03:25 PM, SA5QED/David wrote:
Any more info on your new project?
QRP, DDC/DUC. ADC 16 bit, DAC 14 bit. LCD 5", case size 190x120x40mm.
The work is in full swing. The electronics engineer completes the circuit and layout of the main board. There is a design for the case. I'm writing firmware on a development board.
|
I'd like to add my thanks to you Oleg for all of your hard work in turning the x6100 from a good machine into a great machine!? I like your firmware a lot more than the stock, and it works great for me.? No complaints and MANY THANKS!!!
Please keep us updated on your new radio!
|
On Mon, Feb 5, 2024 at 04:46 PM, John Flinchbaugh KC3WWC wrote:
Is the source code available for your x6100 firmware??
Yes
|
Is the source code available for your x6100 firmware??
On Sun, Feb 4, 2024 at 11:00 PM, Raimund Reh wrote:
back to earth - when will your CW decoder will work again?
It works. But I’ll do it even better especially for you in the next version. The next version will be the last. I've started working on my own DDC/DUC transceiver and don't want to waste any more time on the X6100.
|
On Mon, Feb 5, 2024 at 03:25 PM, SA5QED/David wrote:
Any more info on your new project?
QRP, DDC/DUC. ADC 16 bit, DAC 14 bit. LCD 5", case size 190x120x40mm. The work is in full swing. The electronics engineer completes the circuit and layout of the main board. There is a design for the case. I'm writing firmware on a development board.
|
Yo también. Me too!
MNY TNX DR OLEG FER ALL = VA TU
Saludos. Diego. EA1CN
--
TNX, Dido. EA1CN
|
Sorry to hear, but THANK YOU VERY MUCH OLEG, for all the effort you have put inte the firmware this far.
Any more info on your new project?
73 de SA5QED
|
If Morse decoding is essential, you should maybe consider paying for a commercial Morse decoder.
There is also a very good Android app Morse Expert, and it's free.
I assume Oleg is developing his X6100 fw on his spare time.
|
On Sun, Feb 4, 2024 at 11:00 PM, Raimund Reh wrote:
back to earth - when will your CW decoder will work again?
It works. But I’ll do it even better especially for you in the next version. The next version will be the last. I've started working on my own DDC/DUC transceiver and don't want to waste any more time on the X6100.
|
back to earth - when will your CW decoder will work again?
To me it is essential. I am only in CW on air.
You did a nice programming at all.
Please take a look on the CW decoding section.
Thank you so much.
|
just on mine machine... sorry...
|
soory, can't understand the hype.
on my machin firmware hangs. CW decoder wont decode.
last realy running firmware is 0.15
so, what has happen?
|
?
A very good CW decoder automaticaly recognizes and set/adjust the speed ,
automatically adjusts to the signal level (set the audio treshold)
and has a ( small range ) automatic audio frequency tracking. (AFC)
The cw decoder in version 0.17 seems to have worked in the same way.
But unfortunately since version 0.19 this is over nand out ...
?
Take a look at the Android-App. :? Morse Expert .
This app works perfect .
This app is doing the same like I have? described before on the top of
this message .
?
I compared the cw-decoder of the FTDX-10 .
The decoder there is a complete big shit gadget ... he can nothing - only
that you spent most of times
with manually adjustments , searching for the best settings for get some
signs decoded ... hi ...
...it is a big blame and big shame for YAESU !
?
Normaly I don`t need an cw-decoder , I can? better decode with my ears
til 50 wpm.
I use the decoder only for relaxed monitoring and so I see every error from
the decoder .
?
73 , Jens / HB9JOI
?
+++
?
toggle quoted message
Show quoted text
From: Rick
Barnich
Sent: Saturday, January 27, 2024 5:15 PM
Subject: Re: [xiegu-x6100] New version 0.19.0
#R1CBU-Firmware
?
Jens,
CW decoder works with V19... for me. You have to adjust speed close to that
received and it takes a while to sync up. Other than that, it works quite
well.
?
73, Rick K8BMA
? ?
On Sat, Jan 27, 2024, 9:22 AM Jens
<hb9joi@...> wrote:
?
I have moretimes (downloaded and...) created a sd-card vers.0.19 with
Balena-Etcher .
But I can do what I want : in my case , with mine X6100 the CW-decoder
works not in vers.0.19
works only til vers. 0.17 .
I give up ...
?
From: Oleg -
R1CBU
Sent: Friday, January 26, 2024 9:13 AM
Subject: Re: [xiegu-x6100] New version 0.19.0
#R1CBU-Firmware
?
On
Fri, Jan 26, 2024 at 11:11 AM, Jens wrote:
what are Your decoder settings ?? Those that are by default
|
?
In version 0.17? it was equal which cw speed was set , always decoding
and was outstanding .
But since 0.19 functionality is over ...
?
?
toggle quoted message
Show quoted text
From: Rick
Barnich
Sent: Saturday, January 27, 2024 5:15 PM
Subject: Re: [xiegu-x6100] New version 0.19.0
#R1CBU-Firmware
?
Jens,
CW decoder works with V19... for me. You have to adjust speed close to that
received and it takes a while to sync up. Other than that, it works quite
well.
?
73, Rick K8BMA
? ?
On Sat, Jan 27, 2024, 9:22 AM Jens
<hb9joi@...> wrote:
?
I have moretimes (downloaded and...) created a sd-card vers.0.19 with
Balena-Etcher .
But I can do what I want : in my case , with mine X6100 the CW-decoder
works not in vers.0.19
works only til vers. 0.17 .
I give up ...
?
From: Oleg -
R1CBU
Sent: Friday, January 26, 2024 9:13 AM
Subject: Re: [xiegu-x6100] New version 0.19.0
#R1CBU-Firmware
?
On
Fri, Jan 26, 2024 at 11:11 AM, Jens wrote:
what are Your decoder settings ?? Those that are by default
|
Jens, CW decoder works with V19... for me. You have to adjust speed close to that received and it takes a while to sync up. Other than that, it works quite well.
73, Rick K8BMA?
On Sat, Jan 27, 2024, 9:22 AM Jens < hb9joi@...> wrote:
?
I have moretimes (downloaded and...) created a sd-card vers.0.19 with
Balena-Etcher .
But I can do what I want : in my case , with mine X6100 the CW-decoder
works not in vers.0.19
works only til vers. 0.17 .
I give up ...
?
From: Oleg - R1CBU
Sent: Friday, January 26, 2024 9:13 AM
Subject: Re: [xiegu-x6100] New version 0.19.0
#R1CBU-Firmware
?
On
Fri, Jan 26, 2024 at 11:11 AM, Jens wrote:
what are Your decoder settings ?? Those that are by
default
|
The OS firmware might work in one x6100 and not in another.
This goes with my (IMO) idea that there MIGHT have been production? changes in manufacturing the radios.
Just something to ponder.
73,
Steve
On Jan 27, 2024, at 9:22 AM, Jens < hb9joi@...> wrote:
?
I have moretimes (downloaded and...) created a sd-card vers.0.19 with Balena-Etcher .
But I can do what I want : in my case , with mine X6100 the CW-decoder works not in vers.0.19
works only til vers. 0.17 .
I give up ...
?
From: Oleg - R1CBU
Sent: Friday, January 26, 2024 9:13 AM
Subject: Re: [xiegu-x6100] New version 0.19.0 #R1CBU-Firmware
?
On Fri, Jan 26, 2024 at 11:11 AM, Jens wrote:
what are Your decoder settings ??
Those that are by default
|
?
I have moretimes (downloaded and...) created a sd-card vers.0.19 with
Balena-Etcher .
But I can do what I want : in my case , with mine X6100 the CW-decoder
works not in vers.0.19
works only til vers. 0.17 .
I give up ...
?
toggle quoted message
Show quoted text
From: Oleg - R1CBU
Sent: Friday, January 26, 2024 9:13 AM
Subject: Re: [xiegu-x6100] New version 0.19.0
#R1CBU-Firmware
?
On
Fri, Jan 26, 2024 at 11:11 AM, Jens wrote:
what are Your decoder settings ?? Those that are by
default
|
Dj Merrill
SA5QED/David
Raimund Reh
Jens/HB9JOI