开云体育

OK, I've debugged and proven my Xcat PCB layout works. I've uploaded the files to the Files section of the group. Xcat PCB layout by Brad KB9BPF: Notes 26SEP22 - I am NOT interested in building

The following files and folders have been uploaded to the Files area of the [email protected] group. * /X9000 files/U70_8_16_Bit_Multi-Chip_Microcomputer_Data_Book.pdf (

Cool stuff, excellent work! I've been working on trying to make an emulator from a Teensy 4.0 and some level converters. It seems to be spitting out the right data but I'm having a time trying to get

Very cool! Finally got past assorted other commitments and issues and can invest some time in this again. Started digging out radio and accoutrements so I can do some testing. De

Quick progress report... the concept proved! Today I "edited" mode 1 to receive on 147.00, updated the checksum and the (re)selected mode 1 all via SB9600.? It worked! The values were hard coded,

Feel free to upload anything to the files section that won't cause lawyers to come calling... i.e. nothing that even remotely smells of maybe I shouldn't... 73's Skip

@ Dennis, Yeah, after some "now where did I see (or think I saw) that" digging I actually found them over on our favorite Kanuk site. If I ever Dl'd them before I cant find them... or if I did, I

Thanks! I find most computer languages other than Forth pretty readable. It's information gathering I'm interested in anyway, I'm not looking to modify and compile... The lua based gui on the

Nice job finding these! De

Hi Skip, Not sure it will help but I found these......... How's your Pascal?

Here ya go......... Mototools - http://wintarif.narod.ru/index/products/0-4 FDBTool - http://wintarif.narod.ru/index/lua/0-7 There is a Feedback link under the Menu that looks to let one send a

Excellent - Proof of concept! As far as coding the checksum calculation, I Found it easier to calculate the differential. Of course that presumes beginning with a codeplug with a known to be good

Ugh!? Github likes to use "main" and but I always use "master" for the (cough) master branch .... it's there in the "master" branch. 73's Skip WB6YMH PS: The --write option isn't implemented yet.

Very cool! The x9000.py script doesn't seem to have gotten committed to the repo. De

Thanks, I'll have a look at that one too.? But it looks like it might be the same one Stan just posted.? In any case the more the merrier! 73's Skip WB6YMH

Hi Group, I think I've proved the concept.? I just successfully wrote two bytes to EEPROM, read them back and verified them and then exited programming mode w/o resetting the radio.? The checksum

"Lua source" refers, I think, to the Astro FDB tool being mostly written in Lua. W9CR has that zipball here: https://wiki.w9cr.net/images/c/cc/Astro_FDB_Tool.zip De

Thanks Stan! I had looked for the source for Mototools a few week ago, but i failed to find it.? Do you know if source for it was ever posted? 73's Skip WB6YMH

Hi Skip, Check your "g..n" domain if it is still valid. The "bottleneck" is in the name...9600...lol Even a 4.77 XT will be loafing to communicate at that speed. I dont know why this slipped my

Hi group, just a quick update.? I'm making some slow progress with testing the ability to edit code plug data on the fly using SB9600 commands.? I now have a X9000 test bed setup and working minus a