开云体育

Yes, along with `transport input pad` if it's not currently set to include that. (And probably something like `modem CallOut` to have the ESP32 notice when the call is lost and trigger some kind of

So it would be just a matter of setting up XOT and then set up 'rotary' and all set?

On 14/07/2023 00.49, Mantas Mikul?nas via groups.io wrote: > On 14/07/2023 00.44, Mantas Mikul?nas via groups.io wrote: >> On 13/07/2023 23.50, Alice Wyan wrote: >>> Just reread your post, I think I

On 14/07/2023 00.44, Mantas Mikul?nas via groups.io wrote: > On 13/07/2023 23.50, Alice Wyan wrote: >> Just reread your post, I think I misunderstood it the first time around. >> >> The AUX port on

It is, yes. If you mean running actual X.25 communications software on the CP/M – I don't think that'll quite work, as IOS will not let you route X.25 over async lines; I believe it only works over

Whose post? John Sent: Thursday, July 13, 2023 4:50 PM To: [email protected] Subject: Re: [X.25] Getting started Just reread your post, I think I misunderstood it the first time around. The

Just reread your post, I think I misunderstood it the first time around. The AUX port on the Cisco is just an async serial port, right? So what you are suggesting, if I read correctly, would be: a)

Greetings, This sounds like a great idea to me! I do not currently have any equipment up and running using x.25, but I do have some equipment which I believe would be suitable for experimenting with

Try 4040025 for the rsx

It works! On 4040021, I get connected to the PAD, though, not the RSX11M system. When connecting back from the PAD to my VAX, I get a pretty authentic 1980ies X.25 lag. :)

Fixed it. Must set priv level correctly.

Still no: Line has invalid autocommand "x28 " Am Sa., 24. Juni 2023 um 19:48 Uhr schrieb Dave Brown <dave@...>:

Give it another go.

Better, but not there: $ set host /x29 4040021 %PAD-I-COM, call connected to remote DTE Welcome to the Bagpuss PAD To reach Towel (RSX11M) - call towel User Access Verification Username:

I am going to look at adding slip / ppp next week, the Linux Kernel has a 6/7 bit slip support that was done for GPO/BT pads.

Try guest/guest on 4040021

Let me adjust it.

404001 rejects my call. 404002 wants me to log in, but I don't have credentials.

Yes 404002 is my PAD, you could also try 404001 which is my other cisco.

Dave, I guess the cisco at 404002 is yours? What's the NUA of your PAD, would you share? Thanks, Hans Am Mi., 21. Juni 2023 um 14:02 Uhr schrieb Dave Brown <dave@...>: