¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Winfldigi
  2. Topics

Struggling with a/d interface

 

Hi all. I hope somebody can help me...
?
I have an FT-101, which I successfully use with WSJT-X via an M-Audio M-Track Solo and a slightly doctored rig/sound interface (basically just a couple of audio freqency transformers at this point - another story)
?
I'm trying to set up Fldigi.? I have used Fldigi in the past, but on a different radio with a different laptop, etc.
?
If I use the laptop mic, I can decode CW.? I can play an ARRL file on my phone and see the signal on the waterfall and the message decoded.? But if I try via the m-track, it's just noise (silence I think).? If open the device with Reaper I see the signal, and as stated if I use the devide with WSJT-X it works fine.? So, the problem does seem to be somewhere between the device and Fldigi.
?
I've tried downloading the latest Fldigi (4.1.22) and wiping my config and starting afresh.? I've tried changing the sample-rate and ensuring these match between the device and Fldigi config.? I've tried changing the sample depth (2ch: 32bit, 24bit and 16bit are available) and I've tried increasing the device prefered buffer size.? I've tried disabling Rx monitor, setting playback to my laptop speakers.
?
I'm not sure what else to check.? Any hints would be much appreciated.
?
(also, what does "do not flame anyone" mean? I tried googling it and just got a bunch of forum rules with no explanation. I've never come across this expression before)
?
?
?
?
 

Is this the newer ft101 or 30 year old version.? Pc or Mac??? Doesthe 101 have drivers installed

sent by ve3wej on samsung s21+


On Thu, Oct 17, 2024, 10:28?a.m. Jimi Wills via <mm0jtx=[email protected]> wrote:
Hi all. I hope somebody can help me...
?
I have an FT-101, which I successfully use with WSJT-X via an M-Audio M-Track Solo and a slightly doctored rig/sound interface (basically just a couple of audio freqency transformers at this point - another story)
?
I'm trying to set up Fldigi.? I have used Fldigi in the past, but on a different radio with a different laptop, etc.
?
If I use the laptop mic, I can decode CW.? I can play an ARRL file on my phone and see the signal on the waterfall and the message decoded.? But if I try via the m-track, it's just noise (silence I think).? If open the device with Reaper I see the signal, and as stated if I use the devide with WSJT-X it works fine.? So, the problem does seem to be somewhere between the device and Fldigi.
?
I've tried downloading the latest Fldigi (4.1.22) and wiping my config and starting afresh.? I've tried changing the sample-rate and ensuring these match between the device and Fldigi config.? I've tried changing the sample depth (2ch: 32bit, 24bit and 16bit are available) and I've tried increasing the device prefered buffer size.? I've tried disabling Rx monitor, setting playback to my laptop speakers.
?
I'm not sure what else to check.? Any hints would be much appreciated.
?
(also, what does "do not flame anyone" mean? I tried googling it and just got a bunch of forum rules with no explanation. I've never come across this expression before)
?
?
?
?
 

On Thu, Oct 17, 2024 at 03:50 PM, Dave Garber wrote:
30
Hi. Thanks for responding... good questions.
?
A bit more than 30 years old I think... it's from the early to mid 70s.
There are no drivers for the actual radio, no.
I'm on Windows 11.
?
?
 

It sounds like you have selected the wrong sound card ? Device.? If you have transformers line into Jack's on pc,then select internal microphone not what sounds like a camera microphone

sent by ve3wej on samsung s21+


On Thu, Oct 17, 2024, 11:15?a.m. Jimi Wills via <mm0jtx=[email protected]> wrote:
On Thu, Oct 17, 2024 at 03:50 PM, Dave Garber wrote:
30
Hi. Thanks for responding... good questions.
?
A bit more than 30 years old I think... it's from the early to mid 70s.
There are no drivers for the actual radio, no.
I'm on Windows 11.
?
?
 

On Thu, Oct 17, 2024 at 05:07 PM, Dave Garber wrote:
you have transformers line into Jack's on pc,then select internal microphone not what sounds like a camera microphone
It's definitely the correct device... my external M Audio M-Track Solo... which connects to the laptop via USB and to the radio via transformers.? It's the same device I select when using WSJT-X, which works fine.

1 - 5 of 5