I recently upgraded to V. 4.2.06 from an earlier version.? On the earlier version, the RxID function was working properly, but since the upgrade it is not.? I have both RxID and TxID enabled.? I am running the program on Windows 7 Pro.? No changes that I know of other than the version upgrade to 4.2.06.? Is anyone else having this issue?? Assuming not, any suggestions?? I use Fldigi on a net where we often switch between MT63 and Olivia depending on propagation, and the TxID/RxID functionality is much appreciated.

?

73,

?

Dave, W9PFD

? ?

Hi Dave,

There are several settings needed to make it all work.


I attach my info hoping it will be clear enough to get going. If not, let me know. I also use Win7 and your FLdigi version is fully functional.


Good luck!


73s SWL Tobias
.-.-.

Thanks, Tobias.

?

I checked the settings you pointed out.? ?All the RX & TX modes are selected.? I am suspecting that it may be the Min BW Detection setting as the default was pretty narrow, but I don't remember having needed to adjust this previously.? We shall see.? The nets I use this for are all on Tuesdays.? I was interested to find the RSID settings in Notifications.? Don't think I had been aware of that.? Do you know if there is a way to get the RSID marker to include the callsign of the transmitting station?

Hello Dave,

The passband option was not there before, thus I assume this may have been the issue last time.

Since the RSID signal only contains a standardized code for the DigiMode (and by its nature the approximate audio frequency for tuning), the callsign is, generally, not yet known at this point.

In a QSO, you may know it from the previous messages, but any new station may call in instead and thus the previous call would not match either.

So I guess you may need to keep track of the calls independently.

For your net, have you tried using Thor or MFSK before? Thor is very forgiving in terms of tuning errors, MFSK, so far, the most robust and rather fast mode, but it requires precise tuning. You probably know that W1AW uses MFSK16 for its 'QST' radiograms, we in Europe usually prefer the double speed MFSK32 for QTCs and Ham nets on shortwave.


Good luck, I hope it will work now, as expected. Please let us know how it went next time...


Vy 73 Tobias
.-.-.

Thanks again for the info.? The passband setting being a new feature may explain a lot.

?

I will let you know how it goes.

?

Dave

?

Thanks Dave,

Looking forward to your test results next week.

73s Tobias
.-.-.

Should have said "Right click the RxID on main menu" and select Passband.

?

Bobby/N4AU

Thanks, Tobias & Bobby.

?

Setting the passband did the trick.? On the nets today the RxID was back to working normally.

?

73,

?

Dave, W9PFD

?

?

Hi Dave,

Glad it works, enjoy!


Thanks for sharing your experience!


73s Tobias
.-.-.