开云体育

Hello all.

I have been using fldigi on an XP operating system with no problems.
I recently upgraded to a new pc running Windows Vista Home Premium
with a 64 bit operating system. I have installed the latest v3.03
for Vista operting system (fldigi-3.03-winV.zip).

Everything runs fine for 5 to 10 minutess and then fldigi locks up.
The waterfall stops, and some of the funtion keys work. For examaple
it I select TX it will go into TX mode but it will take several
seconds before the function actually changes. You can never get it
back to RX. With Hamlib Controller you can change to a stored
frequency but the frequency display is incorrect on the controller.

Here are the specs on the new pc if it helps.

Model: HP Pavillion dv7 Notebook PC
Processor: AMD Turuion X@ Dual_Core Mobile RM-70 2 GHz
Memory (RAM): 4.00 GB
System type: 64-bit Operating System

I am using a RigExpert Plus USB interface which I have downloaded and
installed the latest drivers. I have downloaded and installed
Service Pack 1 for the Vista operating system. So I'm pretty sure
I've got evertything up to date and the radios are an IC-703 and FT-
1000MP.

Has anyone else had this or a similar problem? Any suggestions would
be appreciated as the old XP system has bit the dust and I'm
exclusively on the new PC.

Thanks and 73,

Jim W1RET

Hi Jim

Have you tested out your Rigexpert on another data mode software ie like MixW ?.

I remember reading somewhere about provlems with 64bit Vista drivers.

Best Regards,

Dave G3VFP

.
w1ret wrote:

Hello Dave,

Do you mean problems with 64 bit Vista drivers for RigExpert?

Thanks,

Jim W1RET

--- In win-fldigi@..., David <g3vfp@...> wrote:

Hi Jim

Have you tested out your Rigexpert on another data mode software ie

like

MixW ?.

I remember reading somewhere about provlems with 64bit Vista

drivers.

Best Regards,

Dave G3VFP

.
w1ret wrote:

Hello all.

I have been using fldigi on an XP operating system with no

problems.

I recently upgraded to a new pc running Windows Vista Home Premium
with a 64 bit operating system. I have installed the latest v3.03
for Vista operting system (fldigi-3.03-winV.zip).

Everything runs fine for 5 to 10 minutess and then fldigi locks

up.

The waterfall stops, and some of the funtion keys work. For

examaple

it I select TX it will go into TX mode but it will take several
seconds before the function actually changes. You can never get

it

back to RX. With Hamlib Controller you can change to a stored
frequency but the frequency display is incorrect on the

controller.

Here are the specs on the new pc if it helps.

Model: HP Pavillion dv7 Notebook PC
Processor: AMD Turuion X@ Dual_Core Mobile RM-70 2 GHz
Memory (RAM): 4.00 GB
System type: 64-bit Operating System

I am using a RigExpert Plus USB interface which I have downloaded

and

installed the latest drivers. I have downloaded and installed
Service Pack 1 for the Vista operating system. So I'm pretty sure
I've got evertything up to date and the radios are an IC-703 and

FT-

1000MP.

Has anyone else had this or a similar problem? Any suggestions

would

be appreciated as the old XP system has bit the dust and I'm
exclusively on the new PC.

Thanks and 73,

Jim W1RET


------------------------------------

Yahoo! Groups Links





-------------------------------------------------------------------

-----

No virus found in this incoming message.
Checked by AVG -
Version: 8.0.175 / Virus Database: 270.8.2/1739 - Release Date:

22/10/2008 07:23

Hi Jim

Yes, but I can't remember where I saw the article. Certainly worth
checking out with the agent for sure. I assume you have already
tried using it with MixW on the same system. MixW version 2.18
automatically installs the rigexpert so you would soon find out
if there were a problem.

In general guys have had problems installing some software(s)
with Vista, and I have a pdf file on it which I will place in the
win-fldigi files area. In fact there will be a message and link
following this mail.

Worth checking out these various options anyhow Jim.

Best Regards,

Dave G3VFP

Dave,

Yes, I have sent off an email this evening asking about 64 bit
drivers. I haven't reloaded mixw yet but I have tried it with
DM780/HRD with the same results. I will try to load mixw and see if
that anwers any questions.

Thanks for the help and the file!

73,

Jim W1RET
--- In win-fldigi@..., Dave <g3vfp@...> wrote:

Hi Jim

Yes, but I can't remember where I saw the article. Certainly worth
checking out with the agent for sure. I assume you have already
tried using it with MixW on the same system. MixW version 2.18
automatically installs the rigexpert so you would soon find out
if there were a problem.

In general guys have had problems installing some software(s)
with Vista, and I have a pdf file on it which I will place in the
win-fldigi files area. In fact there will be a message and link
following this mail.

Worth checking out these various options anyhow Jim.

Best Regards,

Dave G3VFP


On 22/10/2008 23:06:05, w1ret (w1ret@...) wrote:
> Hello Dave,
>
> Do you mean problems with 64 bit Vista drivers for RigExpert?
>
> Thanks,
>
> Jim W1RET
>
> --- In win-fldigi@..., David wrote:
> >
> > Hi Jim
> >
> > Have you tested out your Rigexpert on another data mode

software ie

> like
> > MixW ?.
> >
> > I remember reading somewhere about provlems with 64bit Vista
> drivers.
> >
> > Best Regards,