开云体育

FLRIG WONT CONNECT TO COMPUTER

Dave Knight N4XYZ All Messages By This Member #37119 Hi , Dave, N4XYZ here. I have been using FLRIG and FLDIGI for quit some time. I haven't had any problem with FLRIG up to including 2.0.3.? FLRIG 2.0.5 wont connect to my computer.? I have a Dell desktop with I7 running windows 11. I have a MicroHam Microkeyer II which gives me 2 serial ports connected to a IC-7800.? When I start FLRIG the progress bar moves about half way across the icon then a flag comes up saying FLRIG is shutting down.? FLRIG fails connecting to the com port. The com port particulars are 19,200 8N1. I have tried slowing the baud rate,? deleted the flrig.prefs file plus anything else I can think to try but no go,? If anybody has any ides for me to try please let me know. ? Dave, N4XYZ ? ?
Arvind Mallya All Messages By This Member #37120 I have the same problem with IC7300 and the newer Flrig. The older (1.4.7 etc) works. The Rigcat and Hamlib is what I use now. -Arvind toggle quoted message Show quoted text On Fri, Sep 13, 2024, 8:10?AM Dave Knight N4XYZ via <n4xyz=[email protected]> wrote: Hi , Dave, N4XYZ here. I have been using FLRIG and FLDIGI for quit some time. I haven't had any problem with FLRIG up to including 2.0.3.? FLRIG 2.0.5 wont connect to my computer.? I have a Dell desktop with I7 running windows 11. I have a MicroHam Microkeyer II which gives me 2 serial ports connected to a IC-7800.? When I start FLRIG the progress bar moves about half way across the icon then a flag comes up saying FLRIG is shutting down.? FLRIG fails connecting to the com port. The com port particulars are 19,200 8N1. I have tried slowing the baud rate,? deleted the flrig.prefs file plus anything else I can think to try but no go,? If anybody has any ides for me to try please let me know. ? Dave, N4XYZ ? ?
Cliff #37121 开云体育 Arvind and Dave, Make sure nothing else is grabbing the serial port. You can try deleting or renaming the IC-7000.prefs or the IC-7300.prefs file or just rename the flrig.files directory for a completely new install. I use an IC-7300 and flrig is solid and has been for years with all the versions. I use linux and MacOS mostly, but have a Windows 10 install that also runs fine. You can try the newest flrig-2.0.05.70 from ??if you wish. 73, Cliff, AE5ZA toggle quoted message Show quoted text On Sep 13, 2024, at 10:21, Arvind Mallya via <armallya@...> wrote: I have the same problem with IC7300 and the newer Flrig. The older (1.4.7 etc) works. The Rigcat and Hamlib is what I use now. -Arvind On Fri, Sep 13, 2024, 8:10?AM Dave Knight N4XYZ via??<n4xyz=[email protected]> wrote: Hi , Dave, N4XYZ here. I have been using FLRIG and FLDIGI for quit some time. I haven't had any problem with FLRIG up to including 2.0.3.? FLRIG 2.0.5 wont connect to my computer.? I have a Dell desktop with I7 running windows 11. I have a MicroHam Microkeyer II which gives me 2 serial ports connected to a IC-7800.? When I start FLRIG the progress bar moves about half way across the icon then a flag comes up saying FLRIG is shutting down.? FLRIG fails connecting to the com port. The com port particulars are 19,200 8N1. I have tried slowing the baud rate,? deleted the flrig.prefs file plus anything else I can think to try but no go,? If anybody has any ides for me to try please let me know. ? Dave, N4XYZ ? ?
Dave Knight N4XYZ All Messages By This Member #37122 Cliff, something changed after Flrig 2.0.3. All new version since crash. I don't think it would make a difference but the newer versions don't have a selection for stop bits. ?If something else is using the com port 2.0.3 wouldn't work but it does FB. ? Dave, N4XYZ
Arvind Mallya All Messages By This Member #37123 Cliff? Nothing is holding up the serial port. Like I said the older version of Flrig works with no problem. So something is different now for the IC7300.? The new Fldigi both Rigcat and Hamlib work just fine. -Arvind toggle quoted message Show quoted text On Fri, Sep 13, 2024, 9:26?AM Cliff via <ae5zaham=[email protected]> wrote: Arvind and Dave, Make sure nothing else is grabbing the serial port. You can try deleting or renaming the IC-7000.prefs or the IC-7300.prefs file or just rename the flrig.files directory for a completely new install. I use an IC-7300 and flrig is solid and has been for years with all the versions. I use linux and MacOS mostly, but have a Windows 10 install that also runs fine. You can try the newest flrig-2.0.05.70 from ??if you wish. 73, Cliff, AE5ZA On Sep 13, 2024, at 10:21, Arvind Mallya via <armallya@...> wrote: I have the same problem with IC7300 and the newer Flrig. The older (1.4.7 etc) works. The Rigcat and Hamlib is what I use now. -Arvind On Fri, Sep 13, 2024, 8:10?AM Dave Knight N4XYZ via??<n4xyz=[email protected]> wrote: Hi , Dave, N4XYZ here. I have been using FLRIG and FLDIGI for quit some time. I haven't had any problem with FLRIG up to including 2.0.3.? FLRIG 2.0.5 wont connect to my computer.? I have a Dell desktop with I7 running windows 11. I have a MicroHam Microkeyer II which gives me 2 serial ports connected to a IC-7800.? When I start FLRIG the progress bar moves about half way across the icon then a flag comes up saying FLRIG is shutting down.? FLRIG fails connecting to the com port. The com port particulars are 19,200 8N1. I have tried slowing the baud rate,? deleted the flrig.prefs file plus anything else I can think to try but no go,? If anybody has any ides for me to try please let me know. ? Dave, N4XYZ ? ?

Previous Topic Next Topic