开云体育

I think the issue is the sound card does not have a wide enough bandwidth. j [email protected]> wrote:

Hi all, Just a little quirk I noticed (and which caused me quite some cursing and despair): When the FT-818 is in WFM mode (say, used as an ordinary FM radio receiver for your favourite FM

Tnx Dave! Hope all is well with you guys and Hello to Skip! 73 de Steve

Thanks John. That's what I needed. Appreciate it a lot. Dit Dit -- 73's de NU4N

Dave, Ck the attachment. John KC3FL

Not me...not necessarily...the vid DOES explain very well what you wanted to say. But for all the words and all the BOLD text, the conversation missed the target for me. Except they DO mention it,

Greetings, I have an issue with the Perseus with FLDigi an BlackCat WEFAX (the only two decoders that I have. Note the vertical interference marks showing on both decoders.? However on the Perseus,

Dumb question but on one of my computers I can't seem to expand upward the waterfall. What setting in FLDIGI config file do move the waterfall up and down. Thanks Dave -- *73's de NU4N*

Yeah.? Some people have a hard time understanding unless they can see it. For those that complain about video quality, I'm neither a youtuber nor a maker of fine videos.? It's worth every penny

Very nice video. I'm sure that some will criticize the sometimes fuzzy image, but it succinctly provides exactly what I wanted to know. I have recommended it to digirig in my discussion with

Yes, you can use the digirig lite without anything extra.? With a HT and I assume any other radio for which you have digirig cables. You don't need any other board.? No RA Board.? No DRA. I made

ABSOLUTELY brilliant !! It works both in FLRIG and FLDIGI now! Here are my software settings-the only change on the radio was to turn USB Keyer CW to DTR. [image: image.png] [image:

On the 7300 Click Menu then Set then Connectors The USB Send Keying What are your settings in that window??? On my 7300 I have: USB SEND Off USB Keying (CW) DTR USB Keying (RTTY) Off On your second

PTT is just a switch between sending and receiving. The method of key-down signal is selected depending on the rig. 2025年3月25日(火) 8:02 Anders Georgsson via groups.io

Then I will have to set it on radio as Keyer(CW) RTS too, right? I thought FLDIGI used CI-V to control PTT and then sent the tone? /Anders Georgsson [email protected]> wrote:

In the first "Xcvr" image, I think you need to check "RTS/CTS". And when I'm on CW, I set the mode to "CW" on both my rig and the app. 2025年3月25日(火) 3:25 Anders Georgsson via groups.io

Well, when I wrote, I was under the impression that if I bought a digirig lite, and I wanted to use GPIO3 control, I needed to buy an RA Board. I imagined... Computer > RA board > digirig lite >

No, no.? Sorry for the confusion.? If you already have a digirig, you don't need anything else. If you have a regular *digirig mobile* : * *For radios that have CAT control* : Configure your digi

Yep. Was there. Not to be picky, but as a newbie to /this/ subject, I was not sure what "GPIO3 (RA-Board)" actually meant...because it doesn't /say/ needs extra purchase, as many of the other digirig

*https://digirig.net/choosing-digirig-model/* (look in the PTT methods row) OK.? I was wrong about the regular digirig mobile -- it can't do the "RA Board" PTT method.? It can do PTT via CAT