开云体育

Thanks for the reply, Reed. However, that page didn't answer my
questions... My brother has a 360 out of a Jeep truck. On the block right
underneath the motor mount, "360" is embossed. My motor doesn't have that,
so I don't know any other way to tell what it is. According to that page,
the 304 wasn't made till the '70's. I know this motor to be '60's vintage.
I've been told that the 390 was made in the '60's, and now I see that the
304 wasn't made in the '60's. So I'm thinking that it's a 390. I'm not
sure what it came out of. Has anyone on this list ever seen a 390 and know
how to identify one?

Thanks again,

Blaine

From: Reed Cary <recary@...>
Subject: Re: Motor ID

You might have a look here:

Reed (CA)

--- "Blaine S." <blaines@...> wrote:

From: "Blaine S." <blaines@...>

Anyone know how to tell the difference between a 304 and 390? I can't
remember what's in my Jeep. I know the motor is about circa 1969...

What

years did AMC make the 304? What about the 390?

Blain-

Go to:

http//www.amxfiles.com

And go to the "Resources" section then go to the "Technical Info"
section and scroll down to a link called "AMC Small Block V-8's" and
there is a brief description of the 290/340/390 engine of your vintage.

If you don't find what your looking for in the site I'm sure there's
some real AMC gurus there that could answer your questions.

Frank(MI)

'47 CJ-2A
'63 6-230 4WD
'63 J-200 Gladiator
'64 Wagoneer (Organ Donor)
'76 CJ-5 Renegade 304 V-8



"When Your work speaks for itself, don't interrupt."
- Henry J. Kaiser