开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Willystech
  2. Topics

Dana 41 breather…..

 

Have a pretty bad pinion yoke leak and will be changing the seal and need to also make sure my breather isn’t clogged…..that is,if I can find it!!! Any help is greatly appreciated……I THOUGHT I read somewhere(?) it was on top of axle-drivers side but I sure cant find it(may be painted over)…..thank you
 

I hope this will open for you. If not, search,
?
cj3a.info/tech/vent
?
?

In a message dated 7/18/2022 8:45:35 PM Eastern Standard Time, Cpezdog911@... writes:
?

Have a pretty bad pinion yoke leak and will be changing the seal and need to also make sure my breather isn’t clogged…..that is,if I can find it!!! Any help is greatly appreciated……I THOUGHT I read somewhere(?) it was on top of axle-drivers side but I sure cant find it(may be painted over)…..thank you

 

Michael. Take a look at my Specifications page, go down to Rear Axle and you should see a picture showing the position of the breather hole on a Dana 44. This might not be the same position as your 41. You can find kits to reposition the breather on any axle and also hook up tubing to ensure water won’t get in during “wading”.

Pavel up North.
 

?This might help .

Don Wood 46CJ2A

Sent?via?BlackBerry?10
? Original Message ?
From: willyswagon230
Sent: Tuesday, 19 July 2022 11:45
To: [email protected]
Reply To: [email protected]
Subject: Re: [WillysTech] Dana 41 breather…..

Michael. Take a look at my Specifications page, go down to Rear Axle and you should see a picture showing the position of the breather hole on a Dana 44. This might not be the same position as your 41. You can find kits to reposition the breather on any axle and also hook up tubing to ensure water won’t get in during “wading”.

Pavel up North.

vent.jpg

 

Thank you!!!!!! That should get me there…..you guys are the best???

On Jul 19, 2022, at 12:04 PM, Don Wood <donaldhwood@...> wrote:

??This might help .

Don Wood 46CJ2A

Sent via BlackBerry 10
Original Message
From: willyswagon230
Sent: Tuesday, 19 July 2022 11:45
To: [email protected]
Reply To: [email protected]
Subject: Re: [WillysTech] Dana 41 breather…..

Michael. Take a look at my Specifications page, go down to Rear Axle and you should see a picture showing the position of the breather hole on a Dana 44. This might not be the same position as your 41. You can find kits to reposition the breather on any axle and also hook up tubing to ensure water won’t get in during “wading”.

Pavel up North.










vent.jpg

 

?This might help .

Don Wood 46CJ2A

Sent?via?BlackBerry?10
? Original Message ?
From: willyswagon230
Sent: Tuesday, 19 July 2022 11:45
To: [email protected]
Reply To: [email protected]
Subject: Re: [WillysTech] Dana 41 breather…..

Michael. Take a look at my Specifications page, go down to Rear Axle and you should see a picture showing the position of the breather hole on a Dana 44. This might not be the same position as your 41. You can find kits to reposition the breather on any axle and also hook up tubing to ensure water won’t get in during “wading”.

Pavel up North.

vent.jpg

 

Got it……definitely plugged……thanks for all your help!!???

On Jul 19, 2022, at 1:48 PM, Don Wood <donaldhwood@...> wrote:

??This might help .

Don Wood 46CJ2A

Sent via BlackBerry 10
Original Message
From: willyswagon230
Sent: Tuesday, 19 July 2022 11:45
To: [email protected]
Reply To: [email protected]
Subject: Re: [WillysTech] Dana 41 breather…..

Michael. Take a look at my Specifications page, go down to Rear Axle and you should see a picture showing the position of the breather hole on a Dana 44. This might not be the same position as your 41. You can find kits to reposition the breather on any axle and also hook up tubing to ensure water won’t get in during “wading”.

Pavel up North.










vent.jpg

1 - 7 of 7