Compass for a 3B
开云体育? ? Too much of a headache… Best option: Sell me the Willys and be done with it! ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? ? Hello All; ? I just bought a Ritchie compass for the jeep, mounted it on the windshield, but it just wont calibrate.? (Too much steel!)? Off the jeep it is reasonable accurate.? Does anyone have any ideas?? (Other than digital!) ? Thank you, ? Chris in VT ? |
|
Sure.......$20,000,000 and it is yours!!!!!
?
?
? From: "AWORKOFMARC" <marcwhittemore@...> Sent: Sunday, July 11, 2021 11:55 AM To: [email protected] Subject: Re: [WillysTech] Compass for a 3B ?
? ? Too much of a headache… Best option: Sell me the Willys and be done with it! ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? ? Hello All; ? I just bought a Ritchie compass for the jeep, mounted it on the windshield, but it just wont calibrate.? (Too much steel!)? Off the jeep it is reasonable accurate.? Does anyone have any ideas?? (Other than digital!) ? Thank you, ? Chris in VT ? ? |
开云体育? I wish!? I’m neck deep in my own restoration project of a 57 Wagon. ? ? Not a bad price though…. fully restored? Original? ? ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? Sure.......$20,000,000 and it is yours!!!!! ? ? ? From: "AWORKOFMARC" <marcwhittemore@...> ? ? ? Too much of a headache… Best option: Sell me the Willys and be done with it! ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? ? Hello All; ? I just bought a Ritchie compass for the jeep, mounted it on the windshield, but it just wont calibrate.? (Too much steel!)? Off the jeep it is reasonable accurate.? Does anyone have any ideas?? (Other than digital!) ? Thank you, ? Chris in VT ? ? |
|
It's 20,000,000.00, not 20,000.00!!!!? That's what it would take for me to sell it.? :>)
?
I took it down to the frame, fixed some weak spots and had it powder coated, had the motor rebuilt, rebuilt the transfer case and transmission, all new kingpins, bearings, seals, etc.? 2 new front axles........
Unfortunately I had to get a new tub as mine was badly rotted - I cut the blank dash out of the new tub, drilled out the spot welds on the old dash, and welded it in. Replaced the generator with an alternator and wired it with a fuse box.
?
I still need to replace the cushions, and a thousand other little things.
?
Chris in VT
?
? From: "AWORKOFMARC" <marcwhittemore@...> Sent: Sunday, July 11, 2021 2:52 PM To: [email protected] Subject: Re: [WillysTech] Compass for a 3B ?
? I wish!? I’m neck deep in my own restoration project of a 57 Wagon. ?? ? Not a bad price though…. fully restored? Original? ? ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? Sure.......$20,000,000 and it is yours!!!!! ? ? ? From: "AWORKOFMARC" <marcwhittemore@...> ? ? ? Too much of a headache… Best option: Sell me the Willys and be done with it! ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? ? Hello All; ? I just bought a Ritchie compass for the jeep, mounted it on the windshield, but it just wont calibrate.? (Too much steel!)? Off the jeep it is reasonable accurate.? Does anyone have any ideas?? (Other than digital!) ? Thank you, ? Chris in VT ? ? ? |
开云体育You sound as attached to yours as I am mine. ? I’m thinking of having a special urn size compartment made so when I die my ashes can be tucked away and permanently sealed ?–so I be riding shot gun forever more. ? ? ? ? ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? It's 20,000,000.00, not 20,000.00!!!!? That's what it would take for me to sell it.? :>) ? I took it down to the frame, fixed some weak spots and had it powder coated, had the motor rebuilt, rebuilt the transfer case and transmission, all new kingpins, bearings, seals, etc.? 2 new front axles........ Unfortunately I had to get a new tub as mine was badly rotted - I cut the blank dash out of the new tub, drilled out the spot welds on the old dash, and welded it in. Replaced the generator with an alternator and wired it with a fuse box. ? I still need to replace the cushions, and a thousand other little things. ? Chris in VT ? ? From: "AWORKOFMARC" <marcwhittemore@...> ? ? I wish!? I’m neck deep in my own restoration project of a 57 Wagon. ?? ? Not a bad price though…. fully restored? Original? ? ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? Sure.......$20,000,000 and it is yours!!!!! ? ? ? From: "AWORKOFMARC" <marcwhittemore@...> ? ? ? Too much of a headache… Best option: Sell me the Willys and be done with it! ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? ? Hello All; ? I just bought a Ritchie compass for the jeep, mounted it on the windshield, but it just wont calibrate.? (Too much steel!)? Off the jeep it is reasonable accurate.? Does anyone have any ideas?? (Other than digital!) ? Thank you, ? Chris in VT ? ? ? |
|
Yes, I am.? I put 3000 miles on it last summer, and every good weekend I am out exploring different parts of Vermont.? I try to stay on dirt roads and have a bunch of Class 4 roads marked out on the map to explore.
?
Chris in VT
?
?
?
? From: "AWORKOFMARC" <marcwhittemore@...> Sent: Monday, July 12, 2021 11:02 AM To: [email protected] Subject: Re: [WillysTech] Compass for a 3B ?
You sound as attached to yours as I am mine. ? I’m thinking of having a special urn size compartment made so when I die my ashes can be tucked away and permanently sealed ?–so I be riding shot gun forever more. ? ?? ? ? ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? It's 20,000,000.00, not 20,000.00!!!!? That's what it would take for me to sell it.? :>) ? I took it down to the frame, fixed some weak spots and had it powder coated, had the motor rebuilt, rebuilt the transfer case and transmission, all new kingpins, bearings, seals, etc.? 2 new front axles........ Unfortunately I had to get a new tub as mine was badly rotted - I cut the blank dash out of the new tub, drilled out the spot welds on the old dash, and welded it in. Replaced the generator with an alternator and wired it with a fuse box. ? I still need to replace the cushions, and a thousand other little things. ? Chris in VT ? ? From: "AWORKOFMARC" <marcwhittemore@...> ? ? I wish!? I’m neck deep in my own restoration project of a 57 Wagon. ?? ? Not a bad price though…. fully restored? Original? ? ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? Sure.......$20,000,000 and it is yours!!!!! ? ? ? From: "AWORKOFMARC" <marcwhittemore@...> ? ? ? Too much of a headache… Best option: Sell me the Willys and be done with it! ? ? ? From: [email protected] <[email protected]> On Behalf Of Chris Caswell ? ? Hello All; ? I just bought a Ritchie compass for the jeep, mounted it on the windshield, but it just wont calibrate.? (Too much steel!)? Off the jeep it is reasonable accurate.? Does anyone have any ideas?? (Other than digital!) ? Thank you, ? Chris in VT ? ? ? ? |
|
Yup.? It was a hard won job and I intend to drive her as long as I am able!
?
Chris in VT
?
?
? From: "Pruit Ginsberg via groups.io" <pruitg@...> Sent: Monday, July 12, 2021 9:47 AM To: [email protected] Subject: Re: [WillysTech] Compass for a 3B ?
That is more like it, Chris. ?I remember the saga of restoring it.
Pruit
?
|
Chris Caswell
AWORKOFMARC
