¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. W8bhMorseTutor
  2. Topics

Library for MorseTutor_ESP32.ino

 

Where do I find a link for the Zip Library for MorseTutor_ESP32.ino ?

Tnx Gary, KF9CM
 

Gary,

Morse Tutor documentation starts here:?
Builder's guide for ESP32 version is here:?
Code, including ESP-32 version, is on github here:??

Bruce

On Sun, May 30, 2021 at 7:59 PM GARY GILES <Buzz@...> wrote:
Where do I find a link for the Zip Library for MorseTutor_ESP32.ino ?

Tnx Gary, KF9CM

 

Hi,
I have all those, what I need is;
"Adafruit_GFX.h"
"Adafruit_ILI9341.h"
"SD.h"
"esp_now.h"
and the associated cpp files.

Tnx Gary, KF9CM
 

Gary,

I believe that SD and esp_now libraries are installed with the ESP32 arduino core, so you shouldn't need to download them separately.? ?

The Adafruit libraries can be downloaded and installed from within the IDE itself.? See page 2 of? for an overview of the process.? ?Adafruit also has an overview of their graphics libraries here:?

Bruce
?

On Sun, May 30, 2021 at 8:38 PM GARY GILES <Buzz@...> wrote:
Hi,
I have all those, what I need is;
"Adafruit_GFX.h"
"Adafruit_ILI9341.h"
"SD.h"
"esp_now.h"
and the associated cpp files.

Tnx Gary, KF9CM

 

Thank you for the help,
The only problem is I have a problem with the include command files "esp_now.h". Where find the download library file folder which includes the "esp_now.h" and
"esp_now.cpp" files? (see attachment)

Tnx Gary, KF9CM

arduinofault.jpg

 

It's been 4 days of trying different things and to no avail. I downloaded "esp_now.h" and"esp_now.cpp" from GitHub, placed them in a folder, put in the library? folder and now I get a compiling? error. You said "esp_now.h" and"esp_now.cpp" are included in a version of Arduino sketch...which version ?

Tnx Gary, KF9CM
 

Hello Gary,

I am sorry to hear that you are having so much trouble.? My guess is that the ESP32 core is not correctly installed in your Arduino IDE.? There are plenty of online tutorials that explain the process better than me.??

I would check the following on your Arduino IDE (I am using version 1.8.13):

1.? Go to File -> Preferences?and check your value for "Additional Board Manager URLs".? One of the URLs should be for ESP32 installation.? There is more than one correct URL, but the one I use is: ""

2.? Go to Tools -> Board.? ?Do you see your ESP32 board listed there?? If not, go to Tools -> Board -> ESP32 Arduino and select your board from the list.

3.? If you don't see ESP32 Arduino in step 1, then perhaps ESP32 is not installed in your IDE.? Go to Tools -> Board -> Boards Manager and search for "ESP32 by Expressif systems".? ?My version of?this is 1.0.2.? There are several newer versions.? ?It should say "INSTALLED".? If it is not installed, then please install it.

4.? Confirm that the?sample ESP32 sketches work.? Go to File -> Examples -> Examples for (your ESP32 board) , select one of the examples listed, and try to upload it to your ESP32 board.? ?At least one of these samples is for ESP_Now.

I hope that you are able to solve your problem.

Bruce


On Thu, Jun 10, 2021 at 10:15 AM GARY GILES <Buzz@...> wrote:
It's been 4 days of trying different things and to no avail. I downloaded "esp_now.h" and"esp_now.cpp" from GitHub, placed them in a folder, put in the library? folder and now I get a compiling? error. You said "esp_now.h" and"esp_now.cpp" are included in a version of Arduino sketch...which version ?

Tnx Gary, KF9CM

 

Hi,

In the last week I have tried everything to get my Generic STM32F103C to program to run.? I have tried different program versions as well as all the required library files and tools files to no avail. What is needed is a sketch program with all the required files, tested? and put into a folder for download. I ran the blink program and it worked. The following is an error file I get every time I compile the Morse code program:



Arduino: 1.8.13 (Windows 10), Board: "Generic STM32F103C series, STM32F103C8 (20k RAM. 64k Flash), Serial, 72Mhz (Normal), Smallest (default)"


C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\buzzg\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\buzzg\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -fqbn=stm32duino:STM32F1:genericSTM32F103C:device_variant=STM32F103C8,upload_method=serialMethod,cpu_speed=speed_72mhz,opt=osstd -vid-pid=10C4_EA60 -ide-version=10813 -build-path C:\Users\buzzg\AppData\Local\Temp\arduino_build_898964 -warnings=none -build-cache C:\Users\buzzg\AppData\Local\Temp\arduino_cache_447870 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.stm32tools.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2021.5.31 -prefs=runtime.tools.stm32tools-2021.5.31.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2021.5.31 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -verbose D:\Download\morse-tutor-master(1)\morse-tutor-master\MorseTutor_ESP32\MorseTutor_ESP32.ino

C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\buzzg\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\buzzg\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -fqbn=stm32duino:STM32F1:genericSTM32F103C:device_variant=STM32F103C8,upload_method=serialMethod,cpu_speed=speed_72mhz,opt=osstd -vid-pid=10C4_EA60 -ide-version=10813 -build-path C:\Users\buzzg\AppData\Local\Temp\arduino_build_898964 -warnings=none -build-cache C:\Users\buzzg\AppData\Local\Temp\arduino_cache_447870 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.stm32tools.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2021.5.31 -prefs=runtime.tools.stm32tools-2021.5.31.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2021.5.31 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -verbose D:\Download\morse-tutor-master(1)\morse-tutor-master\MorseTutor_ESP32\MorseTutor_ESP32.ino

Using board 'genericSTM32F103C' from platform in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31

Using core 'maple' from platform in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31

Detecting libraries used...

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Adafruit_GFX.h: [[email protected]]

ResolveLibrary(Adafruit_GFX.h)

? -> candidates: [[email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Adafruit_I2CDevice.h: [[email protected]]

ResolveLibrary(Adafruit_I2CDevice.h)

? -> candidates: [[email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Wire.h: [[email protected] [email protected]]

ResolveLibrary(Wire.h)

? -> candidates: [[email protected] [email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for SPI.h: [[email protected]]

ResolveLibrary(SPI.h)

? -> candidates: [[email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Font16.h: [Adafruit_GFX_AS]

ResolveLibrary(Font16.h)

? -> candidates: [Adafruit_GFX_AS]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Adafruit_ILI9341.h: [Adafruit_ILI9341]

ResolveLibrary(Adafruit_ILI9341.h)

? -> candidates: [Adafruit_ILI9341]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_ILI9341" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for EEPROM.h: [EEPROM]

ResolveLibrary(EEPROM.h)

? -> candidates: [EEPROM]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_ILI9341" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\EEPROM" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for SD.h: [[email protected]]

ResolveLibrary(SD.h)

? -> candidates: [[email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_ILI9341" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\EEPROM" "-IC:\\Program Files (x86)\\Arduino\\libraries\\SD\\src" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for esp_now.h: [esp_now]

ResolveLibrary(esp_now.h)

? -> candidates: [esp_now]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_ILI9341" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\EEPROM" "-IC:\\Program Files (x86)\\Arduino\\libraries\\SD\\src" "-IC:\\Program Files (x86)\\Arduino\\libraries\\esp_now" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Preferences.h: []

ResolveLibrary(Preferences.h)

? -> candidates: []

In file included from D:\Download\morse-tutor-master(1)\morse-tutor-master\MorseTutor_ESP32\MorseTutor_ESP32.ino:36:0:

Multiple libraries were found for "Wire.h"

C:\Program Files (x86)\Arduino\libraries\esp_now/esp_now.h:5:25: fatal error: Preferences.h: No such file or directory

?#include <Preferences.h>

???????????????????????? ^

compilation terminated.

?Used: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\Wire

?Not used: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\WireSlave

Using library Adafruit-GFX-Library-master at version 1.10.10 in folder: C:\Program Files (x86)\Arduino\libraries\Adafruit-GFX-Library-master

Using library Adafruit_BusIO-master at version 1.7.5 in folder: C:\Program Files (x86)\Arduino\libraries\Adafruit_BusIO-master

Using library Wire at version 1.0 in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\Wire

Using library SPI at version 1.0 in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\SPI

Using library Adafruit_GFX_AS in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\Adafruit_GFX_AS (legacy)

Using library Adafruit_ILI9341 in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\Adafruit_ILI9341 (legacy)

Using library EEPROM in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\EEPROM (legacy)

Using library SD at version 1.2.4 in folder: C:\Program Files (x86)\Arduino\libraries\SD

Using library esp_now in folder: C:\Program Files (x86)\Arduino\libraries\esp_now (legacy)

exit status 1

Error compiling for board Generic STM32F103C series.
 

Hello Gary.

That is an impressively long error log.? I confess that I didn't read it all, but I did notice a few things to try.

First, I noticed that one or more libraries still have the suffix?"-master" on them.? ?You should remove that suffix when you install libraries (see?), so that could potentially be one issue.

Second, review page 2 of the setup instructions? ().? ? Specifically, please check the version number of the Adafruit GFX library you are using.? ?You should use 1.5.3.? ?Your error log refers to a later version?1.10.10, which is probably not compatible.

You may also find it helpful to start at the beginning of the project () and work your way up from the blink sketch to the final code.? ? Any errors you encounter between steps can then be attributed to whatever changed in the code.

Bruce

On Sun, Jun 20, 2021 at 3:22 PM GARY GILES <Buzz@...> wrote:
Hi,

In the last week I have tried everything to get my Generic STM32F103C to program to run.? I have tried different program versions as well as all the required library files and tools files to no avail. What is needed is a sketch program with all the required files, tested? and put into a folder for download. I ran the blink program and it worked. The following is an error file I get every time I compile the Morse code program:



Arduino: 1.8.13 (Windows 10), Board: "Generic STM32F103C series, STM32F103C8 (20k RAM. 64k Flash), Serial, 72Mhz (Normal), Smallest (default)"


C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\buzzg\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\buzzg\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -fqbn=stm32duino:STM32F1:genericSTM32F103C:device_variant=STM32F103C8,upload_method=serialMethod,cpu_speed=speed_72mhz,opt=osstd -vid-pid=10C4_EA60 -ide-version=10813 -build-path C:\Users\buzzg\AppData\Local\Temp\arduino_build_898964 -warnings=none -build-cache C:\Users\buzzg\AppData\Local\Temp\arduino_cache_447870 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.stm32tools.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2021.5.31 -prefs=runtime.tools.stm32tools-2021.5.31.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2021.5.31 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -verbose D:\Download\morse-tutor-master(1)\morse-tutor-master\MorseTutor_ESP32\MorseTutor_ESP32.ino

C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\buzzg\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\buzzg\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -fqbn=stm32duino:STM32F1:genericSTM32F103C:device_variant=STM32F103C8,upload_method=serialMethod,cpu_speed=speed_72mhz,opt=osstd -vid-pid=10C4_EA60 -ide-version=10813 -build-path C:\Users\buzzg\AppData\Local\Temp\arduino_build_898964 -warnings=none -build-cache C:\Users\buzzg\AppData\Local\Temp\arduino_cache_447870 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.stm32tools.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2021.5.31 -prefs=runtime.tools.stm32tools-2021.5.31.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2021.5.31 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\buzzg\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -verbose D:\Download\morse-tutor-master(1)\morse-tutor-master\MorseTutor_ESP32\MorseTutor_ESP32.ino

Using board 'genericSTM32F103C' from platform in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31

Using core 'maple' from platform in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31

Detecting libraries used...

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Adafruit_GFX.h: [[email protected]]

ResolveLibrary(Adafruit_GFX.h)

? -> candidates: [[email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Adafruit_I2CDevice.h: [[email protected]]

ResolveLibrary(Adafruit_I2CDevice.h)

? -> candidates: [[email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Wire.h: [[email protected] [email protected]]

ResolveLibrary(Wire.h)

? -> candidates: [[email protected] [email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for SPI.h: [[email protected]]

ResolveLibrary(SPI.h)

? -> candidates: [[email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Font16.h: [Adafruit_GFX_AS]

ResolveLibrary(Font16.h)

? -> candidates: [Adafruit_GFX_AS]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Adafruit_ILI9341.h: [Adafruit_ILI9341]

ResolveLibrary(Adafruit_ILI9341.h)

? -> candidates: [Adafruit_ILI9341]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_ILI9341" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for EEPROM.h: [EEPROM]

ResolveLibrary(EEPROM.h)

? -> candidates: [EEPROM]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_ILI9341" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\EEPROM" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for SD.h: [[email protected]]

ResolveLibrary(SD.h)

? -> candidates: [[email protected]]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_ILI9341" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\EEPROM" "-IC:\\Program Files (x86)\\Arduino\\libraries\\SD\\src" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for esp_now.h: [esp_now]

ResolveLibrary(esp_now.h)

? -> candidates: [esp_now]

"C:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -w -x c++ -E -CC -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10813 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/stm32f1/include" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/stm32f1" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\system/libmaple/usb/usb_lib" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\cores\\maple" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit-GFX-Library-master" "-IC:\\Program Files (x86)\\Arduino\\libraries\\Adafruit_BusIO-master" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Wire" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\SPI\\src" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_GFX_AS" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\Adafruit_ILI9341" "-IC:\\Users\\buzzg\\AppData\\Local\\Arduino15\\packages\\stm32duino\\hardware\\STM32F1\\2021.5.31\\libraries\\EEPROM" "-IC:\\Program Files (x86)\\Arduino\\libraries\\SD\\src" "-IC:\\Program Files (x86)\\Arduino\\libraries\\esp_now" "C:\\Users\\buzzg\\AppData\\Local\\Temp\\arduino_build_898964\\sketch\\MorseTutor_ESP32.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Preferences.h: []

ResolveLibrary(Preferences.h)

? -> candidates: []

In file included from D:\Download\morse-tutor-master(1)\morse-tutor-master\MorseTutor_ESP32\MorseTutor_ESP32.ino:36:0:

Multiple libraries were found for "Wire.h"

C:\Program Files (x86)\Arduino\libraries\esp_now/esp_now.h:5:25: fatal error: Preferences.h: No such file or directory

?#include <Preferences.h>

???????????????????????? ^

compilation terminated.

?Used: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\Wire

?Not used: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\WireSlave

Using library Adafruit-GFX-Library-master at version 1.10.10 in folder: C:\Program Files (x86)\Arduino\libraries\Adafruit-GFX-Library-master

Using library Adafruit_BusIO-master at version 1.7.5 in folder: C:\Program Files (x86)\Arduino\libraries\Adafruit_BusIO-master

Using library Wire at version 1.0 in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\Wire

Using library SPI at version 1.0 in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\SPI

Using library Adafruit_GFX_AS in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\Adafruit_GFX_AS (legacy)

Using library Adafruit_ILI9341 in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\Adafruit_ILI9341 (legacy)

Using library EEPROM in folder: C:\Users\buzzg\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2021.5.31\libraries\EEPROM (legacy)

Using library SD at version 1.2.4 in folder: C:\Program Files (x86)\Arduino\libraries\SD

Using library esp_now in folder: C:\Program Files (x86)\Arduino\libraries\esp_now (legacy)

exit status 1

Error compiling for board Generic STM32F103C series.
 

Greetings,

I do not know what the current status of a BIN file for the STM32
Morse Tutor is?
With a BIN file, you only need to use the ST LINK V2 dongle to program the MCU.
The ST LINK V2 utilities are very easy to install and use, compared to
compiling for the STM32.

Regards,
Ken, KM4NFQ "Not Fully Qualified"
/g/w8bhMorseTutor
 

Tnx Ken,

That would be great. Unless I missed it in my search, I didn't see any.

73 de Gary,KF9CM
 



MorseTutor.bin 10 months ago

The BIN file is not built from the latest source code, but it should
be functional for all practical purposes.

You will need the ST LINK V2 utilities and dongle.

Regards,
Ken, KM4NFQ "Not Fully Qualified"
/g/w8bhMorseTutor

On Mon, Jun 21, 2021 at 8:58 AM GARY GILES <Buzz@...> wrote:

Tnx Ken,

That would be great. Unless I missed it in my search, I didn't see any.

73 de Gary,KF9CM
 


Hi Guys ,

SUCCESS ! I don't know what version of MorseTutor I have, but it woks. I had to uninstall my Arduino sketch program and then build it up from scratch.


73 de Gary, KF9CM
 

Hello Gary,

I am glad to hear that you got it working!

Let us know what you think of it after you have had a chance to use it
for a while.

Regards,
Ken, KM4NFQ "Not Fully Qualified"
/g/w8bhMorseTutor

On Sun, Jul 4, 2021 at 3:55 PM GARY GILES <Buzz@...> wrote:


Hi Guys ,

SUCCESS ! I don't know what version of MorseTutor I have, but it woks. I had to uninstall my Arduino sketch program and then build it up from scratch.


73 de Gary, KF9CM
 

Hi,
It appears to have limit on the SD ram. I tried a 64 GB chip and it didn't read it, I used a 16 GB chip and it worked. I don't believe this is not mentioned in the text.

73 de Gary, KF9CM
 

Hello Gary,

As far as I know, the SD Card only holds plain text books.
16 GB of plain text books is a lot of books!
How many complete books have you listened to, so far?
Just kidding! 8^D
Listening to plain text books translated into Morse code is a great
way to learn the Morse code.
You should be able to adjust the speed on the fly?

Regards,
Ken, KM4NFQ "Not Fully Qualified"
/g/w8bhMorseTutor

On Mon, Jul 5, 2021 at 9:18 PM GARY GILES <Buzz@...> wrote:

Hi,
It appears to have limit on the SD ram. I tried a 64 GB chip and it didn't read it, I used a 16 GB chip and it worked. I don't believe this is not mentioned in the text.

73 de Gary, KF9CM

1 - 16 of 16