开云体育

Greetings, I only have ONE (JLCPCB) W8BH LC Meter PCB left, so please ask about availability before sending any money for it. This is the first time I have ever done this type of transaction. It has

One small update: I added a case with a 9V battery compartment. All three case designs are posted here: Designs - Thingiverse <https://www.thingiverse.com/w8bh/designs> Bruce w8bh.net

Greetings, I have four extra W8BH LC Meter PCBs from JLCPCB. These are prototype PCBs. Preference will be given to FCC licensed Amateur Radio Hams. One PCB per Ham. Please include your name and

The LC meter enclosures are now available: Thingiverse - W8BH <https://www.thingiverse.com/w8bh/designs> Bruce.

Jim, You ask very good questions which I will try to answer. Thingiverse has a 24-hour embargo policy on new users/designs. I submitted the designs 2 days ago and I don't see them yet either. I guess

Hello Bruce. I did not see your enclosure files on your ThingiVerse link.? It says no content. Do you happen to have a case design that allows for/has room for a 9v rectangular battery in your LC

Greetings, I would once again like to point to the OSH Park PCBs for the W8BH LC Meter: https://oshpark.com/shared_projects/6f1GMVnp The OSH Park PCBs are ENIG, purple, and Made in the USA. They send

I know that I speak for many when I say thanks to you for your really excellent projects (which you make available to all, and you thoroughly detail on your website). You make this adventure

The LC meter project is finished and now includes a 3D printed enclosure. Links are provided below. Once again, many thanks to Ken KM4NFQ for reviewing the documentation. Bruce w8bh.net Builder’s

Greetings, I have ordered 3 W8BH LC Meter PCBs from OSH Park. These are high quality PCBs, suitable for a piece of test equipment. My OSH Park W8BH LC Meter PCB order can be viewed here:

Jim, The link I posted to coreWeaver's GitHub page is for his project only. My LC meter uses a different PCB layout and its Gerbers on my GitHub pages. You mentioned a few of the differences between

Hello Bruce. A couple more questions.? I notice that you call for a PJ-10AH power connector but in looking at that part it appears to be a chassis mount but looks like the board is laid out for a pc

Bruce,? are the gerbers you linked on CoreWeaver's github feed for the layout you show in your builder's guide?? I see it is quite a bit different than the original gerbers from CoreWeaver.? I am

I recently built an LC meter that is based on the famous AADE design. If you are interested, please check out the links below. Many thanks to Ken KM4NFQ for reviewing the documentation. Bruce w8bh.net

Hello all, I built the ESP32 version of the Morse Tutor. It is fantastic except for one little thing. I keep having issues with it adding elements to a string. If I hold down the dit side of my paddle

Hello Jim WA7DUY, Attached is a snapshot of my coreWeaver LC Meter (running W8BH's LC Meter source code). I did not have too much trouble getting the CC capacitor to fit... I just bent the leads

What are CoreWeaver/W8BH LC meter builders using for LED's?? Are the 3mm or are they 5mm? Also,? has anyone had trouble getting the CC capacitor to fit the footprint?? What did you do? Did you just

Jerry, I would like a case like yours for my ESP32 Morse Tutor and before I start laying one out with SCAD, I was wondering if the STLs and/or the design files for your case were ever posted anywhere?

https://www.jameco.com/z/NA5W-K-Fujitsu-5-Volt-178-Ohm-Double-Pole-Double-Throw-Relay_2202360.html Bruce w8bh.net

Hello Jim WA7DUY, I guess I was lucky to find the relays in stock. I have ordered from Newark before, although it was many years ago. You just have to go with the distributor that carries the part. I