¿ªÔÆÌåÓý

  1. W4dccqa
  2. Topics

Powering a PSX-AR

 

I¡¯m installing a PSX-AR board for a reversing section on my layout. ?The reversing section is located between two different buss power districts (DCC). ?At the moment I¡¯m only planning on using the auto-reverse feature of the board.?
Two questions come to mind:
1) I¡¯m using a NCE breaker board between my NCE power supply and the track on each district. ?Should the PSX-AR be located between the NCE breaker and the track or between the power amp/supply and the breaker? I believe from what I¡¯ve read here and elsewhere, power should be supplied between the breaker and track.
2) More important question I think is that my reversing section is located between two different power districtsx-think as a ¡°Y¡± with two track ends powered by different busses. ?Does it matter which power district buss feeds the PSX-AR?
I would appreciate any insight you might have regarding these questions.?
Thank you
Don
 

Don,

The PSX-AR is a combination electronic circuit breaker and a automatic reverse section controller.? It should be placed between booster and the track to be reversed.? Do not place it before or after any other breaker.

It can be controlled by either booster district that you have.

Allan
Wiring for DCC
 

Make sure there is a booster common connection between the two boosters.

Wire the PSX-AR directly between one of the boosters and the track.

DonV

1 - 3 of 3