Keyboard Shortcuts
Likes
Search
Auto Reverser (s)
|
Had used a Digitrax AR1 Auto Reverse Controller, prior to upgrading bus to 14 gauge from?16 gauge, on one reversing section and it worked fine.? Now it allows locos thru one end of the loop but shorts?the system at the other end.? Tried reversing the wiring into the reverser and the problem is solved at one end of the loop but not the other (ie the short is now at the other end of the loop). I substituted a tam valley dual frog juicer, adjusted for reverse loops and it works fine. Unfortunately, I have several of the Digitrax units and would prefer to get them working without buying another Tam Valley unit. Any suggestions would be appreciated Thx, Ted |
|
BillMellott
开云体育What else changed in your system Ted?
Maybe new Booster? New Short Detection? (add a PSX-1 or
other?)
?
anything?
?
I know for me.. and the HMRC (Housatonic Model Railway Club)
layout.. I had a great many AR's in PSX-1 districts - without a problem... and
without me having fully read instructions on the PSX-1 or AR's in use layout
(many different AR Mfg's)
Everything worked great.. till one day we finally got to using the
Wye in one Yard.. and the Wye would not work correctly.
Long story short I had to adjust the CV setting in the PSX-1 for
longer delay for the AR to trigger correctly.
?
Bill From: [email protected] [mailto:[email protected]] On Behalf Of Ted Atkinson Sent: Monday, June 21, 2021 2:49 PM To: [email protected] Subject: [w4dccqa] Auto Reverser (s) Had used a
Digitrax AR1 Auto Reverse Controller, prior to upgrading bus to 14 gauge
from?16 gauge, on one reversing section and it worked fine.? Now it
allows locos thru one end of the loop but shorts?the system at the other
end.? Tried reversing the wiring into the reverser and the problem is
solved at one end of the loop but not the other (ie the short is now at the
other end of the loop).
I substituted a
tam valley dual frog juicer, adjusted for reverse loops and it works fine.
Unfortunately, I
have several of the Digitrax units and would prefer to get them working without
buying another Tam Valley unit.
Any suggestions
would be appreciated
Thx,
Ted |
开云体育Maybe swap in a different AR1?? It's possible the relay contacts
are welded in the unit, and it's unable to properly switch
states.? Or, the circuit is fried completely, and unable to
energize the relay.? I threw out one last year, as it failed to
operate at all even when swapped into a location where another one
had been working fine. Blair On 6/21/2021 3:00 PM, BillMellott
wrote:
|
开云体育Hi Ted ? For the AR1 Manual, see: ? Regards Marcus ? From: [email protected] <[email protected]> On Behalf Of Ted Atkinson
Sent: Tuesday, 22 June 2021 11:32 AM To: [email protected] Subject: Re: [w4dccqa] Auto Reverser (s) ? Thx for everyone's input.? Tried a different one and it worked! I guess the other one has become faulty and cannot likely be?fixed.? Would still appreciate hearing from Alan as to how they are adjustable, just in case this is the issue. ? Thx again, Ted |
|
Timothy Bray
Sorry,? my response was for a different email.? Not sure how I ended up on this one!
toggle quoted message
Show quoted text
Tim
|
|
Sounds like a plan!
toggle quoted message
Show quoted text
|
|
I have a query on a turntable AR - I have installed a Diamond Scale Models turntable with a Tam Valley Dual frog juicer - wired as per instructions but my locos will enter/exit the approach tracks and the roundhouse tracks from only one end of the turntable - from the other end they create a short circuit.
Any suggestions on this? Thx Dan Atkinson |
开云体育Confirm that the frog juicer is set to trip at? lower current than any circuit breaker you have protecting the overall circuit and that the frog juicer is a dual frog juicer working both rails of turntable. ? From: [email protected] [mailto:[email protected]] On Behalf Of dan.b.atkinson@... ? I have a query on a turntable AR - I have installed a Diamond Scale Models turntable with a Tam Valley Dual frog juicer - wired as per instructions but my locos will enter/exit the approach tracks and the roundhouse tracks from only one end of the turntable - from the other end they create a short circuit. |