--- In WiringForDCC@..., "beckemeier53221"
<MBeckemeier@w...> wrote:
Thanks for the info Mike. I had already decided to use a 2 watt,
now I'll probably go with the 3 as you used.
Thanks for the info. Ken
I can attest to the resistors getting toasty. I had to install
over 90
of them on our club layout. Even the 1 watt resistor got quite hot.
I eventually went with a 3 watt 130 ohm resistor and a 0.1uf 50 V
Capacitor. It really cleaned up the signal nice, and is not as hot
to
the touch.
Capacitor:
Newark Part Number: 08B5602 Manufacturer Part Number:
C317C104M5U5CA.
Resistor:
Newark Part Number: 94C3740 Manufacturer Part Number :
5093NW130R0J
Mike Beckemeier
