开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

New Ham Question


 

Good morning, all! I am a new ham with a new HT. I have not yet made a contact but not for lack of trying. I have 5 of our local repeaters programmed into my HT but thus far have heard nothing but what I believe is CW. Is anyone available to review these settings and tell me if I’ve made an error? Thank you so much! I look forward to interacting with all of you!
Dawn KF?PUP


 

What all repeaters do you have programmed? If you hold the PTT button for just a second and release it, do you hear the repeater? It should stay open for another half a second or so then Nunley. If you’re not hearing that, make sure your offset is correct and CTCSS tone is correct.?

?


 

Sorry I overlooked your picture that answered all the questions I had. Where are you located??


 

开云体育

I am just outside the city limits of West Plains off South 17.

On May 13, 2024, at 11:26?AM, Eric Presser - KD0CEN via groups.io <eric.presser@...> wrote:

Sorry I overlooked your picture that answered all the questions I had. Where are you located??


 

开云体育

Thank you for your help. ?I have something wrong because I don’t hear anything when I PTT.

On May 13, 2024, at 11:26?AM, Eric Presser - KD0CEN via groups.io <eric.presser@...> wrote:

Sorry I overlooked your picture that answered all the questions I had. Where are you located??


 

What model radio do you have? The settings pictures look correct. Make sure your squelch is set to 1 or 2…. Something low.?


 

开云体育

I have an Explorer QRZ-1 HT from the JumpStart program for newly licensed hams. ?Squelch was preset to 5, I’ve lowered to 2 at your suggestion. ?When I press the MONI button to suppress the squelch I do hear the static but nothing when I press PTT. ?The same for all the repeaters I’ve programmed.

On May 13, 2024, at 11:36?AM, Eric Presser - KD0CEN via groups.io <eric.presser@...> wrote:

What model radio do you have? The settings pictures look correct. Make sure your squelch is set to 1 or 2…. Something low.?


 

Just checked the 146.940 and 444.425 to confirm both are working. They’re are probably your best bet with an HT from where you’re at. I’ll try to monitor this afternoon but probably won’t be in the area. I’m sure others will be monitoring if you get it figured out and throw your callsign out.?


We also have a club meeting tomorrow night if you would like to bring it by we’ll figure it out.?


 

开云体育

I surely appreciate your kindness. ?I look forward to meeting you all tomorrow. ?I’ll bring it into town today and try from higher ground. ?I am in a little valley that’s fairly wooded.

On May 13, 2024, at 11:59?AM, Eric Presser - KD0CEN via groups.io <eric.presser@...> wrote:

Just checked the 146.940 and 444.425 to confirm both are working. They’re are probably your best bet with an HT from where you’re at. I’ll try to monitor this afternoon but probably won’t be in the area. I’m sure others will be monitoring if you get it figured out and throw your callsign out.?


We also have a club meeting tomorrow night if you would like to bring it by we’ll figure it out.?



 

Being in a valley won’t help for sure. You should be able to get into the 444.425 via HT anywhere in town I believe. ?Also make sure your power is set to high.


 

I did hear you make it in that time on the 940 and tried to call you back but I’m not in a very good spot. May not have heard me.?


 

开云体育

Thank you! Made a contact for radio check from town!

On May 13, 2024, at 13:00, Eric Presser - KD0CEN via groups.io <eric.presser@...> wrote:

?I did hear you make it in that time on the 940 and tried to call you back but I’m not in a very good spot. May not have heard me.?


 

开云体育

Oh, that was you!?

On May 13, 2024, at 13:07, Dawn KF?PUP via groups.io <Dawn.RN@...> wrote:

?Thank you! Made a contact for radio check from town!

On May 13, 2024, at 13:00, Eric Presser - KD0CEN via groups.io <eric.presser@...> wrote:

?I did hear you make it in that time on the 940 and tried to call you back but I’m not in a very good spot. May not have heard me.?