开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
Re: New Ham Question
Thank you! Made a contact for radio check from town!
By Dawn KF?PUP · #178 ·
Re: New Ham Question
I did hear you make it in that time on the 940 and tried to call you back but I’m not in a very good spot. May not have heard me.
By Eric Presser - KD?CEN · #177 ·
Re: New Ham Question
Being in a valley won’t help for sure. You should be able to get into the 444.425 via HT anywhere in town I believe. ?Also make sure your power is set to high.
By Eric Presser - KD?CEN · #176 ·
Re: New Ham Question
I surely appreciate your kindness. I look forward to meeting you all tomorrow. I’ll bring it into town today and try from higher ground. I am in a little valley that’s fairly wooded.
By Dawn KF?PUP · #175 ·
Re: New Ham Question
Just checked the 146.940 and 444.425 to confirm both are working. They’re are probably your best bet with an HT from where you’re at. I’ll try to monitor this afternoon but probably won’t be
By Eric Presser - KD?CEN · #174 ·
Re: New Ham Question
I have an Explorer QRZ-1 HT from the JumpStart program for newly licensed hams. Squelch was preset to 5, I’ve lowered to 2 at your suggestion. When I press the MONI button to suppress the squelch
By Dawn KF?PUP · #173 ·
Re: New Ham Question
What model radio do you have? The settings pictures look correct. Make sure your squelch is set to 1 or 2…. Something low.
By Eric Presser - KD?CEN · #172 ·
Re: New Ham Question
Thank you for your help. I have something wrong because I don’t hear anything when I PTT.
By Dawn KF?PUP · #171 ·
Re: New Ham Question
I am just outside the city limits of West Plains off South 17.
By Dawn KF?PUP · #170 ·
Re: New Ham Question
Sorry I overlooked your picture that answered all the questions I had. Where are you located?
By Eric Presser - KD?CEN · #169 ·
Re: New Ham Question
What all repeaters do you have programmed? If you hold the PTT button for just a second and release it, do you hear the repeater? It should stay open for another half a second or so then Nunley. If
By Eric Presser - KD?CEN · #168 ·
New Ham Question
Good morning, all! I am a new ham with a new HT. I have not yet made a contact but not for lack of trying. I have 5 of our local repeaters programmed into my HT but thus far have heard nothing but
By Dawn KF?PUP · #167 ·
Re: Geomatics Storm Watch Issued
https://m.youtube.com/watch?v=S0E5dt0H_sI <eric.presser@...> wrote:
By Chris Miller · #166 ·
Geomatics Storm Watch Issued
Geomatic Storm Watch Issued ( https://www.swpc.noaa.gov/news/media-advisory-noaa-forecasts-severe-solar-storm-media-availability-scheduled-friday-may-10 )
By Eric Presser - KD?CEN · #165 ·
ARES Net tonight
ARES Net tonight at 7pm on 145.250MHz repeater.
By Eric Presser - KD?CEN · #164 ·
New Amateurs among us!
Today was the final day of our technician class. We had 6 pass the tech test, and 2 pass the General test! Congratulations to all, and we hope you’ll join us at our next club meeting! Thanks to all
By Eric Presser - KD?CEN · #163 ·
ARES net tonight
AREs Net tonight at 7pm on 145.250 repeater. Ryan KF0PEZ is net control!
By Eric Presser - KD?CEN · #162 ·
Re: ARES Net tonight!
Jeremiah is. He's prepping for it. <eric.presser@...> wrote:
By Sierena - KF0LQB · #161 ·
ARES Net tonight!
ARES net at 7pm. Hope someone remembers who net control is because I didn’t write them down. We may need to refer to Steve’s minutes.
By Eric Presser - KD?CEN · #160 ·
Simplex Net Tonight
Simplex Net tonight on 146.52 at 7PM.
By Eric Presser - KD?CEN · #159 ·