LINKS Center 2022 Summer Workshop on Social Network Analysis
Dear UCINET community,
?
The ?at the University of Kentucky offers a workshop on social network analysis (SNA) every summer. In
, this is held in-person with multiple simultaneous tracks and more than 25 instructors and TAs. ?This year, however, we are offering four synchronous
online tracks conducted via Zoom.?With limited exceptions noted below, each track meets on 3-5 days for four to?four and a half?hours a day. We are
also offering a limited number of non-technical one-on-one consultations with experienced research faculty to discuss your individual project(s). The tracks are as follows:
Track 1.
?- June 6, 7, 8
Led by ?, ?and , this course provides a basic introduction to the theory and method of network research. ?Topics include theoretical perspectives, social capital, and the nuts and bolts of doing a network analysis using
UCINET and Netdraw software (both Windows programs). Starting June 6, it meets Monday, Tuesday, and Wednesday from 9:30am-11:30am EDT and 12:30pm-2:30pm EDT (12 contact hours) and provides homework assignments and access to TAs. ?The course costs $1500 ($750
for students).
Track 2.
?- June 13, 14, 15, 16
Taught by ,??this is a more technical and in-depth workshop focusing on the concepts and methods of SNA, particularly as they apply to specific research objectives. The mathematics behind the measures is explained,
as well as how to use the measures in practice. UCINET for Windows software is used extensively. The course meets four times starting June 13: Monday, Tuesday, Wednesday, ?and Thursday 10:00am-12:00pm EDT and 12:30pm-2:30pm EDT (16 contact hours). After each
class, students work on homework assignments with the help of the TAs. ?The course costs $1500 ($750 for students).
Track 3.
?- June 9, 10, 13, 14, 16
Taught by ?and . Like Track 2, this is a more technical and in-depth workshop than the intro workshop, focusing on the concepts and methods of SNA, particularly as they apply to specific research objectives.
This workshop uses the software package R, rather than UCINET. The mathematics behind the measures is explained, as well as how to use the measures in practice. The course meets five times across two weeks starting June 9 with each instructional day consisting
of two sessions: 10:00am-12:15pm EDT and 12:45pm-3:00pm EDT (22.5 contact hours). Participants will receive homework,?which includes running analyses and interpreting results, and which they can perform in small groups of 2?or 3. These results are?then discussed
at?the next meeting.? The course costs $2000 ($1000 for students).
Track 4.
?- June 20, 21, 22, 27, 28 (pm only), 29 (pm only)
Taught by ?and , this course covers ERGMs and SAOMs, two families of statistical models used to model the presence or absence of ties. While the course is introductory, prior familiarity with both statistics and network
analysis is strongly advised. Starting after Track 2?and Track 3?finish, the course meets six?days (22.5?contact hours), across two weeks, starting June 20. The course aims to be interactive, using breakout sessions for the exercises and time between classes
to consolidate knowledge. Participants will receive homework?involving?running further analyses and interpreting result. The homework can be?performed in small groups of 2?or 3. These results are?then discussed at?the next meeting. The course costs $2000 ($1000
for students).
Registration
, and will remain open until 48 hours prior to the start of each track or when the track reaches capacity. Registrants may cancel for a full refund up to 24 hours before the start of their track(s).
?Students receive a 50% discount. ?Additional (half price) discounts are available for members of the University of Kentucky community. ?
Software
It is useful to install the software before the workshop, so that you can get any difficulties ironed out. Please visit our
.
Contact
The website for this workshop is .
?If you have any questions, please contact Scott Soltis <scott.m.soltis@...>.
?In addition, visit your specific track to get contact information for your instructors and TAs.
?
steve
?
Stephen P. Borgatti
Gatton Endowed Chair
Dept. of Management
University of Kentucky
?
|
Re: Finding Network Motifs
I followed the procedure described at the bottom of page 5 in this paper:
?
?
The technique is implemented in ucinet’s ‘Transform|Dichotomize
interactively’ routine.
?
Steve
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Scott Thomas via groups.io
Sent: Tuesday, April 12, 2022 17:40
To: [email protected]
Subject: Re: [ucinet] Finding Network Motifs
?
?
Ok. Looks good, but only one question. Why choose 0.816 as the dichotomize value? Wouldn't 0.50 be acceptable or perhaps the mean value of the matrix?
|
Re: Finding Network Motifs
Ok. Looks good, but only one question. Why choose 0.816 as the dichotomize value? Wouldn't 0.50 be acceptable or perhaps the mean value of the matrix?
|
Re: Finding Network Motifs
This software could be very useful. Thanks for bringing it to our attention.
An advantage of the UCINET data export is that you can vary the minimum tie value to focus on the more strongly connected subgroups.
|
Re: Finding Network Motifs
Scott, your mfinder program wants non-valued data (it’s trying to count up things like triadic configurations). So, you would need to dichotomize your valued 1-mode data. For example, suppose I have the Davis
dataset and create a 1-mode dataset via the Bonacich 72 normalization. I get this:
?
|
|
EVELYN
|
LAURA
|
THERESA
|
BRENDA
|
CHARLOTTE
|
FRANCES
|
ELEANOR
|
PEARL
|
RUTH
|
VERNE
|
MYRNA
|
KATHERINE
|
SYLVIA
|
NORA
|
HELEN
|
DOROTHY
|
OLIVIA
|
FLORA
|
|
EVELYN
|
1.00
|
0.79
|
0.86
|
0.79
|
0.63
|
1.00
|
0.63
|
1.00
|
0.63
|
0.45
|
0.45
|
0.29
|
0.21
|
0.00
|
0.21
|
1.00
|
0.46
|
0.46
|
|
LAURA
|
0.79
|
1.00
|
0.79
|
0.86
|
0.68
|
1.00
|
1.00
|
0.61
|
0.68
|
0.50
|
0.32
|
0.21
|
0.29
|
0.21
|
0.42
|
0.50
|
0.00
|
0.00
|
|
THERESA
|
0.86
|
0.79
|
1.00
|
0.79
|
1.00
|
1.00
|
1.00
|
1.00
|
1.00
|
0.63
|
0.45
|
0.29
|
0.35
|
0.26
|
0.37
|
1.00
|
0.46
|
0.46
|
|
BRENDA
|
0.79
|
0.86
|
0.79
|
1.00
|
1.00
|
1.00
|
1.00
|
0.61
|
0.68
|
0.50
|
0.32
|
0.21
|
0.29
|
0.21
|
0.42
|
0.50
|
0.00
|
0.00
|
|
CHARLOTTE
|
0.63
|
0.68
|
1.00
|
1.00
|
1.00
|
0.67
|
0.67
|
0.00
|
0.67
|
0.47
|
0.00
|
0.00
|
0.32
|
0.27
|
0.41
|
0.00
|
0.00
|
0.00
|
|
FRANCES
|
1.00
|
1.00
|
1.00
|
1.00
|
0.67
|
1.00
|
0.84
|
0.75
|
0.67
|
0.47
|
0.47
|
0.37
|
0.32
|
0.27
|
0.41
|
0.63
|
0.00
|
0.00
|
|
ELEANOR
|
0.63
|
1.00
|
1.00
|
1.00
|
0.67
|
0.84
|
1.00
|
0.75
|
0.84
|
0.67
|
0.47
|
0.37
|
0.50
|
0.45
|
0.60
|
0.63
|
0.00
|
0.00
|
|
PEARL
|
1.00
|
0.61
|
1.00
|
0.61
|
0.00
|
0.75
|
0.75
|
1.00
|
0.75
|
0.75
|
0.75
|
0.65
|
0.61
|
0.56
|
0.48
|
1.00
|
0.69
|
0.69
|
|
RUTH
|
0.63
|
0.68
|
1.00
|
0.68
|
0.67
|
0.67
|
0.84
|
0.75
|
1.00
|
0.84
|
0.67
|
0.55
|
0.68
|
0.45
|
0.60
|
1.00
|
0.63
|
0.63
|
|
VERNE
|
0.45
|
0.50
|
0.63
|
0.50
|
0.47
|
0.47
|
0.67
|
0.75
|
0.84
|
1.00
|
0.84
|
0.73
|
1.00
|
0.63
|
0.78
|
1.00
|
0.63
|
0.63
|
|
MYRNA
|
0.45
|
0.32
|
0.45
|
0.32
|
0.00
|
0.47
|
0.47
|
0.75
|
0.67
|
0.84
|
1.00
|
1.00
|
1.00
|
0.63
|
0.78
|
1.00
|
0.63
|
0.63
|
|
KATHERINE
|
0.29
|
0.21
|
0.29
|
0.21
|
0.00
|
0.37
|
0.37
|
0.65
|
0.55
|
0.73
|
1.00
|
1.00
|
1.00
|
0.74
|
0.63
|
1.00
|
0.54
|
0.54
|
|
SYLVIA
|
0.21
|
0.29
|
0.35
|
0.29
|
0.32
|
0.32
|
0.50
|
0.61
|
0.68
|
1.00
|
1.00
|
1.00
|
1.00
|
0.79
|
0.74
|
1.00
|
0.50
|
0.50
|
|
NORA
|
0.00
|
0.21
|
0.26
|
0.21
|
0.27
|
0.27
|
0.45
|
0.56
|
0.45
|
0.63
|
0.63
|
0.74
|
0.79
|
1.00
|
0.69
|
0.46
|
1.00
|
1.00
|
|
HELEN
|
0.21
|
0.42
|
0.37
|
0.42
|
0.41
|
0.41
|
0.60
|
0.48
|
0.60
|
0.78
|
0.78
|
0.63
|
0.74
|
0.69
|
1.00
|
0.59
|
0.59
|
0.59
|
|
DOROTHY
|
1.00
|
0.50
|
1.00
|
0.50
|
0.00
|
0.63
|
0.63
|
1.00
|
1.00
|
1.00
|
1.00
|
1.00
|
1.00
|
0.46
|
0.59
|
1.00
|
0.77
|
0.77
|
|
OLIVIA
|
0.46
|
0.00
|
0.46
|
0.00
|
0.00
|
0.00
|
0.00
|
0.69
|
0.63
|
0.63
|
0.63
|
0.54
|
0.50
|
1.00
|
0.59
|
0.77
|
1.00
|
1.00
|
|
FLORA
|
0.46
|
0.00
|
0.46
|
0.00
|
0.00
|
0.00
|
0.00
|
0.69
|
0.63
|
0.63
|
0.63
|
0.54
|
0.50
|
1.00
|
0.59
|
0.77
|
1.00
|
1.00
|
?
Now, using Transform|Dichotomize interactively, I decide that I want to dichotomize such that values greater than or equal to .816 will be ties. So I do that and get this:
?
|
|
EVELYN
|
LAURA
|
THERESA
|
BRENDA
|
CHARLOTTE
|
FRANCES
|
ELEANOR
|
PEARL
|
RUTH
|
VERNE
|
MYRNA
|
KATHERINE
|
SYLVIA
|
NORA
|
HELEN
|
DOROTHY
|
OLIVIA
|
FLORA
|
|
EVELYN
|
0
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
0
|
0
|
|
LAURA
|
1
|
0
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
THERESA
|
1
|
1
|
0
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
0
|
0
|
0
|
0
|
0
|
1
|
0
|
0
|
|
BRENDA
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
1
|
1
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
CHARLOTTE
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
0
|
1
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
FRANCES
|
1
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
0
|
0
|
|
ELEANOR
|
1
|
1
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
0
|
0
|
0
|
0
|
1
|
1
|
0
|
0
|
|
PEARL
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
0
|
1
|
1
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
|
RUTH
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
1
|
|
VERNE
|
0
|
0
|
1
|
0
|
0
|
0
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
|
MYRNA
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
|
KATHERINE
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
1
|
0
|
0
|
|
SYLVIA
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
0
|
0
|
|
NORA
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
0
|
1
|
1
|
1
|
1
|
0
|
1
|
0
|
1
|
1
|
|
HELEN
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
0
|
1
|
1
|
1
|
1
|
1
|
1
|
0
|
1
|
1
|
1
|
|
DOROTHY
|
1
|
0
|
1
|
0
|
0
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
0
|
1
|
0
|
1
|
1
|
|
OLIVIA
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
1
|
1
|
1
|
0
|
0
|
1
|
1
|
1
|
0
|
1
|
|
FLORA
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
1
|
1
|
1
|
1
|
0
|
0
|
1
|
1
|
1
|
1
|
0
|
?
Now I use Data|export|DL (legacy), and fill out the form as below. Note the choice of undirected, and minimum tie value? = 1. Also field width 3 will look nicer than the default.
?
?
?
The result is the below, and you can edit out the extra stuff.
?
DL
N=18
FORMAT = EDGELIST1 DIAGONAL ABSENT
SYM = YES
ROW LABELS:
"EVELYN"
"LAURA"
"THERESA"
"BRENDA"
"CHARLOTTE"
"FRANCES"
"ELEANOR"
"PEARL"
"RUTH"
"VERNE"
"MYRNA"
"KATHERINE"
"SYLVIA"
"NORA"
"HELEN"
"DOROTHY"
"OLIVIA"
"FLORA"
COLUMN LABELS:
"EVELYN"
"LAURA"
"THERESA"
"BRENDA"
"CHARLOTTE"
"FRANCES"
"ELEANOR"
"PEARL"
"RUTH"
"VERNE"
"MYRNA"
"KATHERINE"
"SYLVIA"
"NORA"
"HELEN"
"DOROTHY"
"OLIVIA"
"FLORA"
DATA:
?? 2?? 1?? 1
?? 3?? 1?? 1
?? 3?? 2?? 1
?? 4?? 1?? 1
?? 4?? 2?? 1
?? 4?? 3?? 1
?? 5?? 1?? 1
?? 5?? 2?? 1
?? 5?? 3?? 1
?? 5?? 4?? 1
?? 6?? 1?? 1
?? 6?? 2?? 1
?? 6?? 3?? 1
?? 6?? 4?? 1
?? 6?? 5?? 1
?? 7?? 1?? 1
?? 7?? 2?? 1
?? 7?? 3?? 1
?? 7?? 4?? 1
?? 7?? 5?? 1
?? 7?? 6?? 1
?? 8?? 1?? 1
?? 8?? 2?? 1
?? 8?? 3?? 1
?? 8?? 4?? 1
?? 8?? 6?? 1
?? 8?? 7?? 1
?? 9?? 1 ??1
?? 9?? 2?? 1
?? 9?? 3?? 1
?? 9?? 4?? 1
?? 9?? 5?? 1
?? 9?? 6?? 1
?? 9?? 7?? 1
?? 9?? 8?? 1
? 10?? 3?? 1
? 10?? 7?? 1
? 10?? 8?? 1
? 10?? 9?? 1
? 11?? 8?? 1
? 11?? 9?? 1
? 11? 10?? 1
? 12?? 8?? 1
? 12?? 9?? 1
? 12? 10?? 1
? 12? 11?? 1
? 13?? 8?? 1
? 13?? 9?? 1
? 13? 10?? 1
? 13? 11?? 1
? 13? 12?? 1
? 14?? 8?? 1
? 14? 10?? 1
? 14? 11?? 1
? 14? 12?? 1
? 14? 13?? 1
? 15?? 7?? 1
? 15?? 9?? 1
? 15? 10?? 1
? 15? 11?? 1
? 15? 12?? 1
? 15? 13?? 1
? 15? 14?? 1
? 16?? 1?? 1
? 16?? 3?? 1
? 16?? 6?? 1
? 16?? 7?? 1
? 16?? 8?? 1
? 16?? 9?? 1
? 16? 10?? 1
? 16? 11?? 1
? 16? 12?? 1
? 16? 13?? 1
? 16? 15?? 1
? 17?? 8?? 1
? 17?? 9?? 1
? 17? 10?? 1
? 17? 11?? 1
? 17? 14?? 1
? 17? 15?? 1
? 17? 16?? 1
? 18?? 8?? 1
? 18?? 9?? 1
? 18? 10 ??1
? 18? 11?? 1
? 18? 14?? 1
? 18? 15?? 1
? 18? 16?? 1
? 18? 17?? 1
?
?
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Scott Thomas via groups.io
Sent: Tuesday, April 5, 2022 17:03
To: [email protected]
Subject: [ucinet] Finding Network Motifs
?
?
I want to to find network motifs (primarily triads and tetrads) and identify their frequencies, Z-scores, and memberships. I am trying to follow the work of Milo et al. (2002) Network Motifs: Simple Building Blocks of Complex Networks, by using their softrware
(mfinder). Mfinder requires the following format (copied from the manual) =========== <source node> <target node> <edge weight>. Example: 1 2 1 3 1 1 represents a network of 3 nodes with two edges: (1->2) and (3->1) In the current version <edge weight> is
ignored and should be 1 for all edges. Non-directed networks: If the network is non-directed, then every edge should appear only once (means represented by only one line and not two). The order of target and source has no meaning in this case. (Pay attention:
DO NOT represent a non-directed edge by the two equivalent directed edges). =========== 1. My problem is that I use UCINET with my 2-node datasets and when creating a network convert to 1-mode via sums of cross products or Bonacich’72. These symmetric matrices
show ties between all nodes but with varying scores. My original starting 2-mode dataset is binary and therefore undirected. 2. If I create an edgetlist with UCINET it results in all nodes linked to all other nodes by varying degrees. I cannot see how to satisfy
mfinders source->target need AND satisfy the non-directed need to eliminate duplicates such as 1-> and 2->1. 3. The software runs fine and fast with the sample datasets but not my edgelists. I have emailed the Uri Alon lab (source of mfinder) with no response.
Any suggestions on how to create these edgelists would be appreciated. Thank you.
|
I want to to find network motifs (primarily triads and tetrads) and identify their frequencies, Z-scores, and memberships. I am trying to follow the work of Milo et al. (2002) Network Motifs: Simple Building Blocks of Complex Networks, by using their softrware (mfinder).
Mfinder requires the following format (copied from the manual)
===========
<source node> <target node> <edge weight>.
Example:
1 2 1
3 1 1
represents a network of 3 nodes with two edges:
(1->2) and (3->1)
In the current version <edge weight> is ignored and should be 1 for all edges.
Non-directed networks:
If the network is non-directed, then every edge should appear only once (means
represented by only one line and not two). The order of target and source has
no meaning in this case. (Pay attention: DO NOT represent a non-directed
edge by the two equivalent directed edges).
===========
1. My problem is that I use UCINET with my 2-node datasets and when creating a network convert to 1-mode via sums of cross products or Bonacich’72. These symmetric matrices show ties between all nodes but with varying scores. My original starting 2-mode dataset is binary and therefore undirected.
2. If I create an edgetlist with UCINET it results in all nodes linked to all other nodes by varying degrees. I cannot see how to satisfy mfinders source->target need AND satisfy the non-directed need to eliminate duplicates such as 1-> and 2->1.
3. The software runs fine and fast with the sample datasets but not my edgelists. I have emailed the Uri Alon lab (source of mfinder) with no response. Any suggestions on how to create these edgelists would be appreciated. Thank you.
|
Re: data display not showing
How about any other output? E.g., run centrality. Do you see the output? If not, then I think the output is in a window that is hidden in some way. Perhaps minimized.
?
steve
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Jeffrey Broadbent via groups.io
Sent: Friday, March 25, 2022 13:34
To: [email protected]
Subject: Re: [ucinet] data display not showing
?
?
The D button does not work either, and I cannot find the display matrix on any screen.
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
?
?
On Thu, Mar 24, 2022 at 12:42 PM Steve Borgatti <sborgatti@...> wrote:
One thought: maybe the output is appearing on another screen?
?
?
?
Any #h data matrix I try to bring up in display, it just does nothing. ?no error message.
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
?
?
On Thu, Mar 24, 2022 at 12:17 PM Steve Borgatti <sborgatti@...> wrote:
It’s working for me – can you give me more info? Is it every dataset? Is there an error message?
?
steve
?
?
?
On the most recent version and the one before that, the Data-Display command does not bring up a matrix to view your ucinet data matrix. Any way to
fix this?
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
|
Re: data display not showing
Hi The D button does not work either, and I cannot find the display matrix on any screen. very strange! ? Jeff
Jeffrey Broadbent
Professor Emeritus,? Department of Sociology Fellow, Institute on the Environment University of Minnesota Email: broad001@...“The world is much more interesting than any one discipline.”? – Edward Tufte
On Thu, Mar 24, 2022 at 12:42 PM Steve Borgatti < sborgatti@...> wrote:
One thought: maybe the output is appearing on another screen?
?
?
?
Any #h data matrix I try to bring up in display, it just does nothing. ?no error message.
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
?
?
On Thu, Mar 24, 2022 at 12:17 PM Steve Borgatti <sborgatti@...> wrote:
It’s working for me – can you give me more info? Is it every dataset? Is there an error message?
?
steve
?
?
?
On the most recent version and the one before that, the Data-Display command does not bring up a matrix to view your ucinet data matrix. Any way to
fix this?
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
|
Re: data display not showing
One thought: maybe the output is appearing on another screen?
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Jeffrey Broadbent via groups.io
Sent: Thursday, March 24, 2022 12:27
To: [email protected]
Subject: Re: [ucinet] data display not showing
?
?
Any #h data matrix I try to bring up in display, it just does nothing. ?no error message.
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
?
?
On Thu, Mar 24, 2022 at 12:17 PM Steve Borgatti <sborgatti@...> wrote:
It’s working for me – can you give me more info? Is it every dataset? Is there an error message?
?
steve
?
?
?
On the most recent version and the one before that, the Data-Display command does not bring up a matrix to view your ucinet data matrix. Any way to
fix this?
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
|
Re: data display not showing
And does the D button on the toolbar also fail? 6th button from the left.
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Jeffrey Broadbent via groups.io
Sent: Thursday, March 24, 2022 12:27
To: [email protected]
Subject: Re: [ucinet] data display not showing
?
?
Any #h data matrix I try to bring up in display, it just does nothing. ?no error message.
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email: broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
?
?
On Thu, Mar 24, 2022 at 12:17 PM Steve Borgatti <sborgatti@...> wrote:
It’s working for me – can you give me more info? Is it every dataset? Is there an error message?
?
steve
?
?
?
On the most recent version and the one before that, the Data-Display command does not bring up a matrix to view your ucinet data matrix. Any way to fix this?
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
|
Re: data display not showing
Hi Any #h data matrix I try to bring up in display, it just does nothing. ?no error message. thanks Jeff
Jeffrey Broadbent
Professor Emeritus,? Department of Sociology Fellow, Institute on the Environment University of Minnesota Email: broad001@...“The world is much more interesting than any one discipline.”? – Edward Tufte
On Thu, Mar 24, 2022 at 12:17 PM Steve Borgatti < sborgatti@...> wrote:
It’s working for me – can you give me more info? Is it every dataset? Is there an error message?
?
steve
?
?
?
On the most recent version and the one before that, the Data-Display command does not bring up a matrix to view your ucinet data matrix. Any way to fix this?
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
|
Re: data display not showing
It’s working for me – can you give me more info? Is it every dataset? Is there an error message?
?
steve
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Jeffrey Broadbent via groups.io
Sent: Thursday, March 24, 2022 12:12
To: [email protected]
Subject: [ucinet] data display not showing
?
?
On the most recent version and the one before that, the Data-Display command does not bring up a matrix to view your ucinet data matrix. Any way to fix this?
Jeffrey Broadbent
Professor Emeritus,?
Fellow, Institute on the Environment
University of Minnesota
Email:
broad001@...
“The world is much more interesting than any one discipline.”? – Edward Tufte
|
Hi All, On the most recent version and the one before that, the Data-Display command does not bring up a matrix to view your ucinet data matrix. Any way to fix this? Thanks Jeff
Jeffrey Broadbent
Professor Emeritus,? Department of Sociology Fellow, Institute on the Environment University of Minnesota Email: broad001@...“The world is much more interesting than any one discipline.”? – Edward Tufte
|
Re: network visuualization
#help
Dear all, I am new to UCINet. I need some advise about network visualization
?
1. I am using the node attribute editor to color code the nodes based on specific attributes such as country. Is there a way to copy the legend?
?
2. Second, I tried analysis the cliques in the network i found 33 cliques, however it seems there is an issue with the appearence of the clique because if you can see in the picture I get the cliques in the form of a star network, when it should appear like a triangle. because the network is undirected. is there a way to fix this?
?
|
Re: network visuualization
#help
Thank you so much for your advice!
Sincerely,
Maya Fuchs
|
Re: network visuualization
#help
Yes. Which means that the row labels in the data matrix are not identical to the column labels. So if you just fix those, netdraw will be fine.
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
David Tindall via groups.io
Sent: Wednesday, March 9, 2022 10:25
To: [email protected]
Cc: tindall@...
Subject: Re: [ucinet] network visuualization #help
?
?
I believe this is the case when Netdraw thinks you have loaded a two-mode network.
Sincerely,
David Tindall
On 3/9/2022 12:28 AM, maya.fuchs@... wrote:
Hello! I am a UCI newbie and I have a question about network visualization. I have visualized a network with UCINET + Netdraw and it worked fine so far. However, the actors are displayed twice (blue and red; see
figure attachment). Can you tell me the reason for this?
Thank you very much in advance for your support!
Best regards
Maya Fuchs?
--
David Tindall
Professor
Department of Sociology, University of British Columbia
?
Chair
Environment and Society Minor, Faculty of Arts, University of British Columbia
?
Mailing address:
?
Department of Sociology
University of British Columbia
6303 N.W. Marine Drive
Vancouver, British Columbia
Canada V6T 1Z1
?
Office Location: Anthropology and Sociology Building Room 1317
?
E-mail: tindall@...
?
|
Re: network visuualization
#help
I believe this is the case when Netdraw thinks you have loaded a
two-mode network.
Sincerely,
David Tindall
On 3/9/2022 12:28 AM, maya.fuchs@... wrote:
Hello! I am a UCI newbie and I have a question about network
visualization. I have visualized a network with UCINET + Netdraw
and it worked fine so far. However, the actors are displayed twice
(blue and red; see figure attachment). Can you tell me the reason
for this?
Thank you very much in advance for your support!
Best regards
Maya Fuchs?
--
David Tindall
Professor
Department of Sociology, University of British Columbia
Chair
Environment and Society Minor, Faculty of Arts, University of British Columbia
Mailing address:
Department of Sociology
University of British Columbia
6303 N.W. Marine Drive
Vancouver, British Columbia
Canada V6T 1Z1
Office Location: Anthropology and Sociology Building Room 1317
E-mail: tindall@...
|
Re: Exporting attribute data to Excel
Hello, Maybe you can try opening one of the attribute files (for example, krackhightech and hightechattribute? ) built in UCINET and see how it is structured.?
Hope this helps,
Muhchyun?
Hi!
Currently I am working on a project, which requires exporting a UCINET attribute data file to Excel. Unfortunately, I cannot find any information on this on the internet. Does anyone know how to do this?
Thanks in advance!
|
Re: Exporting attribute data to Excel
If you go to the command line interface (CLI, on the toolbar), you can type:
?
->excel “campattr”
?
And the dataset will open in excel. Alternatively, you open ‘campattr’ in the ucinet matrix editor (third button on the left in the toolbar), open your attribute
dataset, and then cut and paste to excel.
?
steve
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of aridangerous4 via groups.io
Sent: Friday, February 18, 2022 07:44
To: [email protected]
Subject: [ucinet] Exporting attribute data to Excel
?
?
Hi!
Currently I am working on a project, which requires exporting a UCINET attribute data file to Excel. Unfortunately, I cannot find any information on this on the internet. Does anyone know how to do this?
Thanks in advance!
|
Exporting attribute data to Excel
Hi!
Currently I am working on a project, which requires exporting a UCINET attribute data file to Excel. Unfortunately, I cannot find any information on this on the internet. Does anyone know how to do this?
Thanks in advance!
|
Malcolm Alexander
