开云体育

Our rear frame support is bent down a little. Has anyone done any support modification that worked, we now store, when at home, with support jack stands at both back corners of the frame.
We do not tow, it was this way when be bought it but the drop in the floor from kitchen to bath is really bothering me now.
Thanks for any feedback.
Great job ya'll keeping the info available over the years.
Stay Kool? Mika

Be careful with this situation. My passenger side frame rail developed a crack which caused the bending you're describing. I jacked up the back of the rail and had a welder weld on some thick steel plates over the crack. At one point I had two lead-acid coach batteries sitting just aft of where it cracked, and that probably contributed towards it.

So, check for cracks.