开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: 1983 Toyota Pick up "Santana" MotorHome For Sale $6500.00

 

Hi sorry for delay I’ve been out of the country the last month. The underneath is rusty as it is
40 years old. There were to small holes on driver and passenger side floor that I sealed.?


Re: Looking for a Sandtana, Bandit, Chinook or other pop up

 

Hi I have a pop up SandTana for sale.


Re: Edited?

 
Edited

Yes, Sue, ?I had reason to edit your last post because not all the links you supplied were "live" -- meaning if anyone were to try to click on them, nothing would have happened. ?So I made them actually link up to the websites you were sharing.

Sorry for the confusion,
Tika


Re: Replace 3.0L with 3.4L engine, 1991 Winnebago Warrior V6

 

Hi Rick,
I wanted to offer a few comments about "newer models" for consideration.? I have both a '92 Warrior and a '08 View - we spend a lot of time in Baja and out of the way locations so did not want anything too big.? There are several nice things about the View: I can pull a toad (but don't), it has the power to easily go over mountain passes, etc, significantly larger holding and fuel tanks (great for boondocking), and admittedly fancier.? However, the Warrior has its own list of benefits: We can park anywhere and do not stand out (we can leave a music venue or such late and just stay in the RV before returning home); I don't have to worry about overhead clearance nearly as much; the layout is fantastic, even with our two kids, a real oven!, there are parts available everywhere. and it can be maintained with automobile-sized tools (I needed to get tires installed at a truck installer on the View).? I love the Warrior and it is difficult to sell her - so she is still part of our family.? If I had the 3.4L it would be a tough call about which RV I would choose as the keeper. It amazes me that there isn't a more modern smaller RV that is as well thought out / designed as the older Toy-based ones.? Good luck with your decision!


Edited?

 

Just got an email from 开云体育 Notification that my last post was "edited by a group moderator." Does that mean that is isn't going to be posted? I did have links in the message so folks could see what product I was referring to.

Slightly confused,
Sue


Re: Winegard Woes

 
Edited

Either of the cheaper ones will help. ?I bought the expensive Wingard digital one, but it is very confusing to operate, so I wouldn’t recommend it. ?(It shows higher digital numbers when the signal is stronger, but you can pretty much tell that anyway by just looking at the TV!) ?

First though I would remove the faceplate where the current coax connection is and see if there isn’t already some 12v wiring behind it. ?If there is a 7 amp fuse holder behind it, then it already has an amplifier. ?But if the fuse is burned out, then of course it won’t work, and the little green light won’t light up. ?If you find a fuse, try replacing it. ?If no fuse but you have 12v wiring, then?buy the one that is a faceplate with amplifier.


Re: Replace 3.0L with 3.4L engine, 1991 Winnebago Warrior V6

 
Edited

These folks in Ellington, CT replaced a 3.0 engine with a different 3.0 for me about 10 years ago. ?I was very satisfied with their work, although it was pricey. ?You can ask them if they would do a 3.4 swap. I’m sure it would overall be cheaper than a double cross-country drive to get it done in Oregon. ?The first task is actually sourcing a donor vehicle with a 3.4 in your region. ?Let us know how your project goes. ?Tika


Re: Replace 3.0L with 3.4L engine, 1991 Winnebago Warrior V6

 

Forgot to mention it is not super easy and plug and play there are modifications that have to be made so most average mechanics won't mess with it and will? try to talk you out of it.
But the specialty shops will do a good job and charge you a small fortune too.


Winegard Woes

 
Edited

So the 1992 camper had a very old Winegard batwing antennae, and NO boost on the wall plate on the inside, just ports for cables ("antennae" and "cable"). Borrowing a new HD TV, I set it up and got 13 analog channels -- mostly public tv and preaching, but whatever.

I got fancy and ordered a Winegard Sensar IV replacement head (not the whole unit), thinking it would add channels -- NOT! Went down to 8 channels, lost all my preachers!

LOOOONNNNNG conversation with a very sweet young lady at Winegard, and it was apparent she was never the kid sent up the old attic ladder to rotate the antennae, as she couldn't grasp that there was no power to the wall outlet (she kept insisting there HAD to be power). And she had no idea why I got less channels. And when I asked if there was anyone else in the office who might know, it kinda ticked her off -- long holds while she "checked with her supervisor," which? may mean she was getting a cup of coffee, or a valium, or both.

I asked about the LNA-100 tv booster (), but she said it wouldn't work ("too much amplification").

I asked if the new antennae was defective, but she said no -- I guess they are pretty simple.

Finally she said I needed to buy this RFL 342 booster and install with "power" and I assume she meant 12 volt. ().

So what do all the OG's here think?

1.Try the booster that plugs in between the TV and the antennae, using the USB to power it from the 220 outlet plate next to the cable plate?
2.Return the Sensar IV, replace the old batwing, and give up?
3.Keep it and try to run 12 volt wires thru the upper cabinet from the undercabinet light fixture and install the LNA 100?
4. Read a book instead?

BTW I asked the guys at Camping World (the seventh level of hell, I know) and they were recommending an old face plate with a 12 volt receptacle RA 7296 ().

Thanks,
Sue


Re: Replace 3.0L with 3.4L engine, 1991 Winnebago Warrior V6

 

Rick,
This is a good summary of the options provided. This was the response from Toy only swaps. There is another company called Northwest toys. They are both in Oregon.
This is a copy of the email that I received when I was first enquiring about the swap. This is from 3 years ago, prices may have increased.
I have a buddy in NW Pennsylvania that ended up doing most of the work for me. I just bought the swap parts from Northwest toys.
I found a 97 4runner that had a rotten frame. It had 107k miles on it. I was able to hear it run before the engine was pulled, which was a big deal for me.
I bought the engine, it came with all the accessories alternator, starter, etc... for $950. I bought a new gasket kit, O2 sensor, spark plugs, timing belt, water pump etc..and put that all on the engine before it was installed.
I bet I have close to $6500 in the entire swap with all parts, I didn't cut corners and bought all Toyota parts. I had a burnt valve or 2 on the 3.0 and needed to do something. I plan on keeping my toyhome for a long time, so I opted for the upgrade. There is no motorhome on the market that is comparable to the old Toyota's that are not big bucks. I bought mine 10 years ago for less than $10k, so I didn't mind adding $6500 to it.

Anyway, here is the emailed that I received:

John,
?
Below is our quote sheet take a look and let me know if you have any questions, if you would like a solid price, highlight or list any of the options you want added and we will put together a formal invoice for your approval, thanks.
?
3.4 swap 90-95 3.0 V6 Toyota RV.?
? ? Complete 3.4 swap/conversion,? parts and labor including engine $4500 Base price If you are automatic add $500 in most cases. This is a start to finish 100% completed conversion ready for pickup,? We have customers from all over the world, we can accept transport of your vehicle or arrange to drop you off/pick you up at the Airport/Train/bus station business hours.?
? ? Engines are all fully tested and inspected to ensure they have been taken care of, come with a 90 day warranty,? average mileage in the 125-150k range. Lower mileage engines can be found prices vary. We will select your engine and let you know exactly what year and mileage is available before we purchase your engine. We need 4 weeks or less to complete your conversion from the time you drop off your vehicle.? A deposit of half down is due before we purchase your conversion, and hold your shop time. Ask about our lead times, we can have swaps booked out for 2-3 months at times.
?
Motorhome specific cost's
?
Steering box / A steering box from a 89-95 2wd 4 cylinder is needed for alternator clearance. Good used steering box installed $150
Exhaust / Additional exhaust modifications are needed to drop the exhaust on the passenger side, then crossover below transmission and connect back into current exhaust system. This is necessary because we do not have enough room to clear the column shift automatic transmission linkage on the drivers side firewall. $200
?
Automatic Transmission upgrade
We reuse your original 3.0 transmission standard, or we can upgrade to a 3.4 automatic transmission at the same time. We find the 3.4 Automatic transmission preforms better, and if your original transmission is giving you problems it would be a good time to upgrade it. If your original 3.0 Transmission is in good working condition then we can re-use it no problem.?
?
3.4 Automatic transmission upgrade parts and labor $750
?
Factory systems?
Not all our customers have these options, and they require additional parts and labor to keep functioning. If you currently have these options and would like to keep them functional
?
Cruise control $150
Air conditioning $150 "if your system is currently functioning and charged."
?
Options, All parts are Factory Toyota, or Aisin OEM replacment.?
Often times the engines we source will have timing belt stickers or show signs of a recent timing belt and water pump. Front main, rear main, and cam seals are inspected and rarely show any signs of leaking. Below are commonly requested maintenance? by our customers, if you have any other requests let us know.
?
New Aisin water pump and Toyota timing belt $250 installed
New Aisin belt tensioner and bearings add $150 installed?
New factory Toyota thermostat $25
New Bando Alternator, ac, Power steering belt $60
New factory Toyota spark plug wires and spark plugs $85
Rear main seal replacement with Factory Toyota Seal $100 installed?
Factory Toyota Front main seal replacement $50 Installed "if done at time of water pump/TB"
Factory Toyota Cam seals $60 "if done at time of water pump/timing belt/valve covers"
New factory Toyota valve cover gaskets, spark plug seals, rear cam caps $150 "highly recommended"
New OEM Toyota engine mounts $100
New Denso Front and rear 02 sensors $195 "highly recommended"
?
Clutch
We reuse your original 3.0 Clutch/flywheel standard, they hold up fine to the 3.4, but the 3.4 clutch is larger/stronger if you want to upgrade now is the time.?
3.4 swap Toyota/Aisin OEM clutch kit $385 with new flywheel
?
Cooling
We reuse your original 3.0 Radiator as long as its in good shape, if not plan on a going new.?
New plastic aluminum radiator $150 "plastic tanks"
New All aluminum HD Radiator $275 "best cooling one we have seen and proven reliable"
New HD all copper radiator $275 "factory replacement"
New Rad Shroud $75 "often customers have broken or missing fan shrouds"
New late model fan blade $75 "we use late model 3.0 fan blades without the ring"
?
Exhaust?
? ? We reuse your current exhaust system, if you have a aftermarket Catalytic Converter, or your stock Catalytic Converter is defective then you will likely get a check engine light for po420 code, Insufficient catalyst flow. In that case we can install a new catalytic converter cost is $250 t0 $450" or can simply add a rear 02 Simulator to send the ECU the proper signal and keep the check engine light off.?
Cost is $135?
?
? ? Complete Exhaust systems, If your Current exhaust is in bad shape, or you just want a larger exhaust we offer full custom exhaust systems, We use 2.5" mandrel bent exhaust tubes for Ideal flow, Magna flow mufflers and High flow catalytic converters, and Gasket-less V-band 'turbo style" Clamps at connection points for easy removal. If you have a preferred muffler rather than magna flow we can look into using it, typically we go with 2.5" pipe, but can go with 2.25" if you prefer,?
Cost is $1000
?
Hood Clearance?
The 3.4 makes contact with the hood and clearance is needed. We can add spacers to the rear of the hood it will have a 1" or 2" gap at the back of hood at the cowl, or we can cut a hole in the hood and add a hood scoop, or we offer low profile intake plenums, we take the upper and middle intake plenums and have the gasket surfaces machined down to gain clearance, this will keep the stock appearance.?
?
Hood scoop $150
Low profile intake plenums $200
?
Security?
Protect your investment from thieves by having a hidden kill switch added. This small toggle switch in a hidden location can be flipped to disable your vehicle insuring no one can start it without knowing its location. Cost $100
?
*Additional prices may apply if your vehicle has excessive aftermarket wiring, stereos, winch, lights, alarms ect...
?
Let me know if you have any other questions, thanks.
Cliff Vann?cliff@...?541-895-2020

--
JohnJab01


Re: Replace 3.0L with 3.4L engine, 1991 Winnebago Warrior V6

 

Yes I have done it and I did all the work myself so it cost me $0 by purchasing a wrecked donor T100 taking all the parts I needed and then selling what was.

I'm well pleased better performance and power and mileage went up about one more mile per gallon. Can climb mountains and pass semis with ease.
If you want to see my post with my friend who did it at the same time you can just search? 5vze on:


Re: Replace 3.0L with 3.4L engine, 1991 Winnebago Warrior V6

 

There are likely several discussions of this topic in the forum archives (hopefully TIka will step in here and direct you to some).

If you'd like an overview of what is involved in the swap, I found this guide from a company that specializes in this sort of work and makes
some of the necessary conversion hardware.



As for the expense, there is simply no way around the fact it will cost a great deal. While the engine swap does not appear to be much more
compicated than a like-for-like engine replacement, engine replacement jobs are time-consuming. Then you add on the time to install the
necessary conversion parts and, most likely, the time to refurbish the donor engine (which is going to be 20-25 years old if sourced
from a junkyard, the 5VZ engine was discontinued in 2004).

Is it worth it? That's up to you. I don't think there's any economic justification for the swap. Maybe if the original engine was toast,
the extra cost of converting over direct replacement could make sense. I would spend my money in other ways, but I was reasonably
happy with my 22RE-powered ToyHome. Your tastes and priorities may be different.

Good luck.

Buzz L.
Phoenix, AZ
Former '86 Dolphin 500, '89 HiLux, and '96 Tacoma owner


Re: Replace 3.0L with 3.4L engine, 1991 Winnebago Warrior V6

 

I don't know of anyone on the east coast, I've been looking for one for several years!? If you find somebody , please let me know.? I have a 22re so it's not as simple a switch as you would have.? An experienced shop on the west coast quoted me a cost of almost 14 k...but that was with many more mods (Including adding ac, which it doesn't have right now)Yours would be much less.? You probably don't want to trek to the west coast, but if you look at their website it will give you an idea of costs for your swap and needed mods.? They also sell some of those mods- like a wiring harness.? Toy Only Swaps in Oregon

On Mon, Jun 26, 2023 at 5:18?AM <fld@...> wrote:
Is there anyone else here besides johnjab01 who has done the 3.0L to 3.4L engine swap in a V6 toyhouse?

Can anyone recommend a shop in New England, New York, New Jersey, or Pennsylvania that can do the swap (meaning a shop that has done it before and knows all the details)?

I asked a local (Manchester, NH) shop that specializes in Toyotas and after they turned me down flat, here are their reasons:

? ? 1. Will need wiring harnesses and engine computer, custom wiring.?
? ? 2. Exhaust work.??
? ? 3. You would be looking at 40-60hrs of labor at $135 hrs most local shops.?
? ? 4. Plus cost of engine,? wiring,? Exhaust,? cooling system....?
? ? 5. It would be a lot cheaper to sell it and buy a newer model.?

Does that sound reasonable?? I've read (here and elsewhere) that the swap is more of a plug-and-play than that.? Does it really need a new wiring harness and computer, for example?? Why the need to work on the cooling system?

As for "selling it and buying a newer model", there aren't any newer models that I can find that don't have the same 3.0L engine (right?) until you get into the Winnebago View and Itasca Navion from the mid-2000's, and they start at $50K for a decent used one up to $200K+ for a new one.

Bottom line, for those of you who have done it, was it worth the expense and effort?? Did you do the work yourself (I'm not physically capable of doing that even if I knew how) or hire a shop to do it?

Thanks...

Rick in NH

?


Replace 3.0L with 3.4L engine, 1991 Winnebago Warrior V6

 

Is there anyone else here besides johnjab01 who has done the 3.0L to 3.4L engine swap in a V6 toyhouse?

Can anyone recommend a shop in New England, New York, New Jersey, or Pennsylvania that can do the swap (meaning a shop that has done it before and knows all the details)?

I asked a local (Manchester, NH) shop that specializes in Toyotas and after they turned me down flat, here are their reasons:

? ? 1. Will need wiring harnesses and engine computer, custom wiring.?
? ? 2. Exhaust work.??
? ? 3. You would be looking at 40-60hrs of labor at $135 hrs most local shops.?
? ? 4. Plus cost of engine,? wiring,? Exhaust,? cooling system....?
? ? 5. It would be a lot cheaper to sell it and buy a newer model.?

Does that sound reasonable?? I've read (here and elsewhere) that the swap is more of a plug-and-play than that.? Does it really need a new wiring harness and computer, for example?? Why the need to work on the cooling system?

As for "selling it and buying a newer model", there aren't any newer models that I can find that don't have the same 3.0L engine (right?) until you get into the Winnebago View and Itasca Navion from the mid-2000's, and they start at $50K for a decent used one up to $200K+ for a new one.

Bottom line, for those of you who have done it, was it worth the expense and effort?? Did you do the work yourself (I'm not physically capable of doing that even if I knew how) or hire a shop to do it?

Thanks...

Rick in NH

?


Re: Cabinet Door

 
Edited

I'm sorry, but my door measures 21" x 14." ?So not a very good match. ?However that one that Linda found at Home Depot looks like a great way to go.


Moderated Re: Ghost in the machine

 

Aaron, I've already custom-built an intermittent wiper module that's worked fine for years, it's just that its time delay relay failed. I just need to source another TDR that'll do the job and replace the faulty one and I'm back in business.


Re: Cabinet Door

 

How about Home Depot. Make custom to the size your need and pick up at your local store for free. This looks pretty close in style

Linda S


Re: What Was This For?

 

I TOTALLY NEED THIS!
Allen Design Cuckoo Bird Clock Style Squirrels Mushrooms Bird Cottagecore Works - Picture 1 of 4


Re: Cabinet Door

 

Thank you Tika, it would be awesome if you had one! The measurement is about 12 x 24", and fits the space where the white microwave is.

Every time I go into the camper I fall more in love with it and can't believe I found one like this! We are in a pattern of constant rain this spring, but I found a couple dry days to scrub the roof and seal it with two coats of Dicor Elastomeric primer and two coats of topcoat. Waiting on another dry day to change the clearance lights to LED's and seal them -- no leaks on this baby!

Sue
92 Rear Bath Itasca
93 Rear Dinette Warrior


Re: What Was This For?

 




Then scroll down