开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Tinysa
  2. Topics

Zero span modus - Possibility of measuring the pulse frequency and hear the sound of a demodulated RF signal

 

Hello, I am thinking of buying tinySA Ultra Spektrumanalysator, especially because it has a zero span modus function.
I studied decriptions, videos and posts in this forum, but could not find an definite answer to my questions to that:
?
Is it possible in zero span modus
to measure (or calculate / visible count) the pulse frequency of a RF signal and hear the sound of a demodulated RF signal ?
?
Example1: WLAN/WIFI at 2.400 MHz. Is ist possible > to measure/see/calculate the pulse signal of 10 Hz? > and to hear the typical WIFi signal sound ?
Example2: DAB-T (digital radio) at e.g. 208 MHz (in Austria). Is ist possible > to measure/see/calculate the pulse signal of 10,42 Hz > and to hear the typical DAB-T signal sound ?
Note: I do not want to hear radio broadcasting but listen to the pulse signal.
?
It would be very fine, if you could help me further - thank you.
?
Greetings, Ron
 

As soon as you activate LISTEN the scanning stops and zero span mode is selected at the frequency of the marker. The audio output is the linear with the signal level inside the active resolution bandwidth, e.g. AM demodulated, with maximum audio frequency of about 12 kHz.
?
--
Designer of the tinySA
For more info go to

1 - 2 of 2