¿ªÔÆÌåÓý

  1. Tinysa
  2. Topics

Touch Screen Issue

 

Just received mine from R&L. Did the firmware up grade and calibration. It worked fine yesterday. Today when it boots up and I touch the screen it defaults to the frequency setting screen. The only inputs it accepts are from the jog wheel. I select? touch test and I get a black screen with STATE: 0. Th jog wheel rotates between 2 and 8 but does not allow selecting either. It does not allow me to d
"drag" the panel. The battery is fully charge. Any thoughts?
Joe WK0G
 

Did you try to press the jog wheel?
Try to reduce pressure from the case on the screen by relaxing the 4 screws
Maybe the pressure causes a false touch
--
For more info on the tinySA go to https://tinysa.org/wiki/
 

I got mine yesterday from Zeenko.? Followed Kurt's video to install the latest FW and set the Ultra Code.

I'm having the same (or similar) issues.? The touch screen makes no sense.? I can touch one "button" and the one above it is selected.? I can get trapped at the numeric pad screen and have to cycle power.? The Touch Test gives me State 0 and wants me to drag the panel, whatever that means.

Not happy.

Wes? N7Ws


On Tue, Dec 6, 2022 at 05:36 PM, Joe Scalet wrote:
Just received mine from R&L. Did the firmware up grade and calibration. It worked fine yesterday. Today when it boots up and I touch the screen it defaults to the frequency setting screen. The only inputs it accepts are from the jog wheel. I select? touch test and I get a black screen with STATE: 0. Th jog wheel rotates between 2 and 8 but does not allow selecting either. It does not allow me to d
"drag" the panel. The battery is fully charge. Any thoughts?
Joe WK0G
 

Please do a touch calibration.
CONFIG/TOUCH
Make you touch exactly in the corners with something like a wooden toothpick to het the best touch calibration
If that does not improve relax the case screws a bit and try again.
--
For more info on the tinySA go to https://tinysa.org/wiki/
 

It's nearly not possible to calibrate it with good quality.
I wrote it here
It would be nice if there will be a change in future.

--
Klaus, DL5KV

1 - 5 of 5