开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Tinysa
  2. Topics

TinySA-saver updated

 

For those using Linux
Multiple segments is now working in tinySA-saver


The tinySA data is in the S21Gain (dB) graph. Suggest to remove all other displayed charts except S21 Gain
Make sure you set the tinySA in high or low input mode before running tinySA-saver
Screen capture works. See "manage"/"screenshot"
Apart from making the data visible I did not do ANYTHING to make it robust
 

I cloned the tinySA repo, then attempted to install just as I had installed NanoVNA-Saver in the past, substituting "tinySA-saver" for "NanoVNA-Saver"? in the command.? It didn't install.? Looking through the files, I see that everything in them is still named NanoVNA-Saver. If I install this, will it uninstall any previously installed versions of NanoVNA-Saver (which, of course, many of us have)?? Does it retain all the original NanoVNA-Saver functions, so that one program now works for both SA and VNA?
 

开云体育

Hi Erik and others

It works OK when remembering to set frequency start and stop before doing a sweep. On the TinySA the Attennuation and reference level must be set to manual in particular for Multiple segments and if so set I got it to work just fine

Thank you for the effort

Kind regards

Kurt

?

?

Fra: [email protected] <[email protected]> P? vegne af erik@...
Sendt: 19. maj 2020 10:53
Til: [email protected]
Emne: [tinysa] TinySA-saver updated

?

For those using Linux
Multiple segments is now working in tinySA-saver


The tinySA data is in the S21Gain (dB) graph. Suggest to remove all other displayed charts except S21 Gain
Make sure you set the tinySA in high or low input mode before running tinySA-saver
Screen capture works. See "manage"/"screenshot"
Apart from making the data visible I did not do ANYTHING to make it robust
 

开云体育

Hi Again

I forgot to mention it was under Windows10 with Phyton 3.7 32bit

//Kurt

?

Fra: [email protected] <[email protected]> P? vegne af erik@...
Sendt: 19. maj 2020 10:53
Til: [email protected]
Emne: [tinysa] TinySA-saver updated

?

For those using Linux
Multiple segments is now working in tinySA-saver


The tinySA data is in the S21Gain (dB) graph. Suggest to remove all other displayed charts except S21 Gain
Make sure you set the tinySA in high or low input mode before running tinySA-saver
Screen capture works. See "manage"/"screenshot"
Apart from making the data visible I did not do ANYTHING to make it robust
 

Jim,

Everything in tinysa-saver now only uses the tinysa name and (if I did not make any mistakes) you should be able to install it on your system next to having nanonvna-saver.
You can also download the repo and run it directly from the commandline
python tinysa-saver.py

Remember:
- In display setup: close all views except "S21 Gain" and check "enable lines"
- Set tinySA in low or high input mode as tinysa-saver can not do this.
- One sweep contains 290 points and you can set as many segments as you like
- Any manual tinySa setting like attenuation or RBW has to be done on the tinySA itself. Nothing available yet in tinysa-saver. But as these are by default in automatic mode everything should work.
- Make sure you keep the start/stop frequencies in the selected low/high mode range
 

开云体育

On 5/19/20 11:25 PM, erik@... wrote:
Everything in tinysa-saver now only uses the tinysa name and (if I did not make any mistakes) you should be able to install it on your system next to having nanonvna-saver.
You can also download the repo and run it directly from the commandline
python tinysa-saver.py


???? Yep, it works now.? Thanks a bunch!? I like being able to get it on the "big screen."? These old eyes don't like that small stuff anymore.? I had to get headband-type magnifier with 5 different lenses to solder some surface mount stuff recently.
 

Been there, done that

1 - 7 of 7