Serial over USB command list started

Erik Kaashoek All Messages By This Member #1065 I started adding the serial over USB command list (console commands) to the wiki Any feedback if this information is sufficient for someone that wants to use this?
Erik Kaashoek All Messages By This Member #1069 The wiki list is complete for now. As you can see many commands are identical to those used in the nanoVNA.
Ham Radio Member Profile All Messages By This Member #1075 Erik: RealTerm on Windows 10 does not recognize the tinySA COMM port for some reason. ?I have seen this issue with other programs as well. TeraTerm works fine. I suspect the sh does autobaud ?detect? ?I used 9600 bps and it worked. You might consider adding something to the Wiki about the setup for the serial console ( 8 bits, NP, 9600 bps)? BTW: checked the calibration my tinySA at 30 MHz versus the calibration port on my HP SA. ? The difference was .3 dBm !! -- 73, Bernie, VE3FWF (most typos in this message were generated by highly sophisticated auto-correction software)
Erik Kaashoek All Messages By This Member #1076 On Thu, Sep 17, 2020 at 07:15 PM, Ham Radio wrote: You might consider adding something to the Wiki about the setup for the serial console ( 8 bits, NP, 9600 bps)? Serial over USB does not work with baud setting. It always works with highest speed

开云体育