开云体育

New FW release
Version v1.1-80

Changes:
- The Low output level button is split in 4 quick up/down buttons and a "set" button to activate the keypad. The slider works as before
- The Output Freq button is split in 4 quick up/down buttons and a "set" button to activate the keypad. The slider works as before and the up/down buttons take their value from the set "RANGE" (use long touch away from slider as before)

These changes are especially convenient for those that use the tinySA in output mode and are used to physical up/down buttons.

The very small text indicates the change when touching above the small text and touching above "set" activates the keypad as previously.

I may have rushed this a bit as I needed this for a current project so if you spot a bug, let me know.

--

Hello Erik,
the modification for level and frequency output works well.But, photo attached,

I noticed at the end of self test some graphic lines at the bottom of the display never seen before.

Yep. Forgot to clear screen after display test. Is gone when selftest finishes.
--

Erik,

Thanks for implementing the step function in the LO output.? Works great!?

The step in the LO frequency was also a good idea.?

Roger