Defect Report: Restore Multi-Band from SD Does Not Restore RBW

Peter Finch All Messages By This Member #15160 A multi-band configuration when restored from SD does not restore RBW. Duplicate by changing the RBW followed by a restore. Oddly, the RBW field in the display shows the incorrect RBW actually being used but when you click on it to bring up the RBW setting the correct/desired value is checked, not the one actually in use. NOTE: This is only a defect for configurations WITH multi-band AND when saved to SD, not one of the 4 in-memory slots. If you prefer, I can open an issue in for this in github. Not sure of proper protocol. Peter
Peter Finch All Messages By This Member #15166 Issue #97 opened.
Erik Kaashoek All Messages By This Member #15167 Good catch, thanks -- Designer of the tinySA For more info go to https://tinysa.org/wiki/
Peter Finch All Messages By This Member #19802 Just noting this defect is still open. ? Also noting that the RBW is saved so if you select RBW on the left info section of the display it will show the correct RBW checked but won't actually be using it. ? Workaround 1 is just reselect the checked RBW. Workaround 2 is disable and reenable multi-band and the correct RBW will be applied. ? Peter

开云体育