¿ªÔÆÌåÓý

  1. Tinysa
  2. Topics

tinySA upgrade extremly slow, is that normal? #tinysa #firmware_update

 

Updating my tinySA with the firmware of december 10th.
Using?DFU_LOAD_BIN.bat (which uses dfu-util-static.exe) it is extremely slow.
The erase already took a long time, it stays long at 0% and then advances very slowly.

The same for the download, stays at 0% for at least 10 mins, now at 11% after approximately 15 minutes. Still some progress, now at 18%.

Is it normal for the tinySA that it takes that long to update the firmware?
When I upgraded my tinySA Ultra earlier this week it was much and much faster, all done within 10's of seconds.

Note: I still need to enable the DFU mode during(!) the execution of DFU_LOAD_BIN.bat, not before, otherwise it does not recognize the device. Same as I experienced earlier this week with the tinySA Ultra.
 

Are you using a USB 3 port?
--
For more info on the tinySA go to https://tinysa.org/wiki/
 

I use a USB-A 3.2 Gen1 port. I used the same USB port tonight for upgrading the iinySA Ultra, in the order of 30 seconds, then it was really much faster than updating the tinySA?

1 - 3 of 3