¿ªÔÆÌåÓý

  1. Tinysa
  2. Topics

TinySA Ultra doesn't go to menu pressing jog

 

I updated firmware to latest release today and everything was fine.
I was in config menu and I connected with the supplied cable RF and CAL connectors, to perform a selftest.
As soon as I did it the yellow trace disappeared and pressing the jog is doing nothing: no menu on the right
?
I am able to put system in DFU and tried to program again formware 3-4 times. Everything seems ok but as soon as I switch on TinySA Ultra as usual, non measure line is displayed and pressing or sliding jog does nothing.
?
I opened the case and plugged off the battery but no way.
?
Any other suggestion?
?
Many thanks,
?
?
Maurizio I2NOY
?
 

¿ªÔÆÌåÓý

Hi,

problem solved cleaning the flat cable from screen to PCB and moving battery back to right side, in order it doesn't touch the flat cable when closing the box.

I hope it will work for years.


Bye,


Maurizio

?

Il 21/04/2025 18:18, Maurizio ha scritto:

I updated firmware to latest release today and everything was fine.
I was in config menu and I connected with the supplied cable RF and CAL connectors, to perform a selftest.
As soon as I did it the yellow trace disappeared and pressing the jog is doing nothing: no menu on the right
?
I am able to put system in DFU and tried to program again formware 3-4 times. Everything seems ok but as soon as I switch on TinySA Ultra as usual, non measure line is displayed and pressing or sliding jog does nothing.
?
I opened the case and plugged off the battery but no way.
?
Any other suggestion?
?
Many thanks,
?
?
Maurizio I2NOY
?

1 - 2 of 2