I bought a TinySA Ultra based on reviews etc in QST way back.
From their recommended sources
I just fired it up at Field Day. Didnt show any RF. Well that was right.
I am now at home with it and reading how to start.
Got to self test and it fails step 3.
Erik asks for a screen shot of config and self test.
Her we go and thanks in advance Erik
--------------------------------------------
tinySA ULTRA
2019-2022 Copyright @Erik Kaashoek
2016-2020 Copyright @edy555
SW licensed under GPL. See: https://github.com/erikkaashoek/tinySA
Version: tinySA4_v1.4-49-g4f5396a
Build Time: Feb ?9 2023 - 09:51:54
Kernel: 4.0.0
Compiler: GCC 7.2.1 20170904 (release) [ARM/embedded-7-branch revision 255204]
Architecture: ARMv7E-M Core Variant: Cortex-M4F
Port Info: Advanced kernel mode
Platform: STM32F303xC Analog & DSP
-----------------------------------------------------
Saving the self test screen is not saving the self test
So per instruction???
The self test flunks at
Test3: Signal Level Fail
------------------------------
I thought I bought from whom QST said, but if I did not, I can
take my punishment. I would prefer getting out the hot air gun and fix it.
Have many SMD micro test clips, but if protecting the proprietary mean forking up
for another, I get it.
So, have I sinned.?
Hartelijk dank Erik voor je harde werk, en ook voor je collega's.
Charlie N2MHS
Roger Need