Hi All,
Unfortunately, I have already asked for another tinySA and not a refund. I have had a thank you from Dexuan510 and they understand my request but no indication of when (if) I shall get an instrument. The tracking on the original has now stalled before the delivery?period. How long is it before one can get a?refund?from Amazon? Does Amazon deal with rogue traders? Also where else in the UK/EU can one buy a tinySA?
Phil G3SES
?
On Fri, 18 Sep 2020 at 17:59, Shirley Dulcey KE1L < mark@...> wrote: It's possible that he meant that his entire shipment of tinySA was damaged. But I'm with the crowd here; I'd take the money (the refund from Amazon) and run to another supplier.
On Fri, Sep 18, 2020 at 12:26 PM Larry Rothman < nlroth@...> wrote:
Guys - personally, I would go for the refund as I've seen stuff like this where the seller waits and waits until you can't claim any longer.
...Larry
On Friday, September 18, 2020, 11:02:31 a.m. EDT, david mugridge < dave@...> wrote:
Phil, I also bought a tinysa from dexuan510 on amazon UK and received exactly?the same "
the case was damaged"?email 3 days ago.
I suspected there was something amiss, and your receiving the same reply from him has now confirmed it.
It may for others stay clear of?
dexuan510
Stay safe, Dave
On Thu, 17 Sep 2020 at 16:37, Philip Stevens < philg3ses@...> wrote: Erik
I ordered my first tinysa via?Amazon UK on Sept 12th.
The seller is Dexuan.
Today I received an email from Dexuan to say that the case was damaged and they have given me two options. Cancel my order. Agree to wait longer for a replacement. I agreed to the latter but do not know the? delivery date as yet.
Let us hope this situation is unusual and packaging will be satisfactory in future.
73 from Phil G3SES
|
|
|
Re: New video: Config and Expert Config menus
hello is there a menu option on the sa so i can level out the line im going to attach a picture so u understand better..this line has scaled up since i attached a external low pass filter.. apart from that its working great..
On Fri, 18 Sep 2020, 16:11 Erik Kaashoek, < erik@...> wrote: A short overview of the Config and Expert Config menus of the tinySA
|
|
|
I'm reading the documentation while waiting for my tinySA to arrive.
It's a used one and has old firmware. V1.0-86: latest is V1.0-91.
The upgrade page mentions "console mode" but not what it is and how to enter it..
And even if I 'should' upgrade..
Could someone please enlighten me?
Thanks
|
It's possible that he meant that his entire shipment of tinySA was damaged. But I'm with the crowd here; I'd take the money (the refund from Amazon) and run to another supplier.
On Fri, Sep 18, 2020 at 12:26 PM Larry Rothman < nlroth@...> wrote:
Guys - personally, I would go for the refund as I've seen stuff like this where the seller waits and waits until you can't claim any longer.
...Larry
On Friday, September 18, 2020, 11:02:31 a.m. EDT, david mugridge < dave@...> wrote:
Phil, I also bought a tinysa from dexuan510 on amazon UK and received exactly?the same "
the case was damaged"?email 3 days ago.
I suspected there was something amiss, and your receiving the same reply from him has now confirmed it.
It may for others stay clear of?
dexuan510
Stay safe, Dave
On Thu, 17 Sep 2020 at 16:37, Philip Stevens < philg3ses@...> wrote: Erik
I ordered my first tinysa via?Amazon UK on Sept 12th.
The seller is Dexuan.
Today I received an email from Dexuan to say that the case was damaged and they have given me two options. Cancel my order. Agree to wait longer for a replacement. I agreed to the latter but do not know the? delivery date as yet.
Let us hope this situation is unusual and packaging will be satisfactory in future.
73 from Phil G3SES
|
Guys - personally, I would go for the refund as I've seen stuff like this where the seller waits and waits until you can't claim any longer.
...Larry
On Friday, September 18, 2020, 11:02:31 a.m. EDT, david mugridge <dave@...> wrote:
Phil, I also bought a tinysa from dexuan510 on amazon UK and received exactly?the same "
the case was damaged"?email 3 days ago.
I suspected there was something amiss, and your receiving the same reply from him has now confirmed it.
It may for others stay clear of?
dexuan510
Stay safe, Dave
On Thu, 17 Sep 2020 at 16:37, Philip Stevens < philg3ses@...> wrote: Erik
I ordered my first tinysa via?Amazon UK on Sept 12th.
The seller is Dexuan.
Today I received an email from Dexuan to say that the case was damaged and they have given me two options. Cancel my order. Agree to wait longer for a replacement. I agreed to the latter but do not know the? delivery date as yet.
Let us hope this situation is unusual and packaging will be satisfactory in future.
73 from Phil G3SES
|
New video: Config and Expert Config menus
A short overview of the Config and Expert Config menus of the tinySA
https://www.youtube.com/watch?v=_vbttwxGq4E
|
Phil, I also bought a tinysa from dexuan510 on amazon UK and received exactly?the same "
the case was damaged"?email 3 days ago.
I suspected there was something amiss, and your receiving the same reply from him has now confirmed it.
It may for others stay clear of?
dexuan510
Stay safe, Dave
On Thu, 17 Sep 2020 at 16:37, Philip Stevens < philg3ses@...> wrote: Erik
I ordered my first tinysa via?Amazon UK on Sept 12th.
The seller is Dexuan.
Today I received an email from Dexuan to say that the case was damaged and they have given me two options. Cancel my order. Agree to wait longer for a replacement. I agreed to the latter but do not know the? delivery date as yet.
Let us hope this situation is unusual and packaging will be satisfactory in future.
73 from Phil G3SES
|
A short video explaining the Preset Menu
|
Re: New FW release: Marker peak and caloutput commands added
Release V1.0-91 available again.
The compiler made a mistake.
|
Re: New FW release: Marker peak and caloutput commands added
|
Re: New FW release: Marker peak and caloutput commands added
Hello erik, selftest 9 failed.
|
New FW release: Marker peak and caloutput commands added
New FW release
Version V1.0-91
Changes:
- MEASURE menu splitted over two menus so the BACK option is visible
- marker {id} peak console command added.?
- caloutput console command added
The marker peak command will make the {id} marker active, position it on the strongest signal and output the marker info
The caloutput command disables or sets the output frequency in MHz
The wiki is updated with these new commands
|
Re: Serial over USB command list started
On Thu, Sep 17, 2020 at 07:15 PM, Ham Radio wrote:
You might consider adding something to the Wiki about the setup for the serial console ( 8 bits, NP, 9600 bps)?
Serial over USB does not work with baud setting. It always works with highest speed
|
Re: Serial over USB command list started
Erik:
RealTerm on Windows 10 does not recognize the tinySA COMM port for some reason. ?I have seen this issue with other programs as well.
TeraTerm works fine.
I suspect the sh does autobaud ?detect? ?I used 9600 bps and it worked.
You might consider adding something to the Wiki about the setup for the serial console ( 8 bits, NP, 9600 bps)?
BTW: checked the calibration my tinySA at 30 MHz versus the calibration port on my HP SA. ?
The difference was .3 dBm !!
--
73, Bernie, VE3FWF
(most typos in this message were generated by highly sophisticated auto-correction software)
|
The tracking on my Amazon order still shows the original arrival dates so I am watching with interest to see if new dates will be given.
I look forward to doing some comparisons with my antique Tektronix 7L12 SA / TR 502 and Marconi TF2720 SA / TG when (if?) the tinySA arrives.
Thank you Erik for a fascinating instrument.
Phil G3SES??
On Thu, 17 Sep 2020 at 19:49, Erik Kaashoek < erik@...> wrote: There are no clones yet. All manufactured by Hugen.?
|
On Thu, Sep 17, 2020 at 12:43 PM, Scott wrote:
s 2.5 milli watts too high of a input to measure harmonics on the low input on the tiny sa?
That is about +3dBm. If you set the internal attenuator to 30dB you should be ok for harmonics measurement
|
hello there just one quick question ......is 2.5 milli watts too high of a input to measure harmonics on the low input on the tiny sa? as im not sure this is the first time in useing this.. i no it has a inntinuator on the sa i will put this on auto not yet tested the harmonic im waiting on your reply as i dont want to put too much rf in ..if u can reply soon as that be great...
On Wed, 16 Sep 2020, 17:15 Erik Kaashoek, < erik@...> wrote: On Wed, Sep 16, 2020 at 08:46 AM, Scott hunter wrote:
..is it minus 10 dbm or a normal 10 dbm which is 10 milli watts thanks
+10dBm
|
There are no clones yet. All manufactured by Hugen.?
|
David KK7SS
Shirley Dulcey KE1L
Ham Radio