开云体育

This is our store https://www.aliexpress.com/item/2255801088090006.html The latest version of tinySA is v0.3.1_EL, note that all tinySA produced in 2022 are v0.3.1_EL version, L means we use LQFP48

Sorry Erik, I forgot to mention the site one has to go to in order to purchase this 'Painted' fake. I was surprised to see so many 5-star reviews for this fake.

Erik, by the way, here is the official site to go to in order for purchase of the "New And Improved" version of a poor fake with painted on letters instead of laser etched. They don't show the already

Hello Erik, Sorry to be bothering you with this But, I received an E-mail from Ali-Express claiming to have the new and improved version of your TinySA being sold by the "Zenko Store" not the Zeenko

After I saw the cal-test fail, on their #9 picture w/video (around the 20 seconds mark), I gave them (See Sii Tools Store) a miss and ordered 2x from RandL Electronics out of the State of Ohio, USA.

I have a SeeSii from amazon and it works well. It's already helped me fix a handful of problems :) Good luck to you and friends! ~ joseph k8sel

If you want to buy from AliAxpress you should buy from the real source: Zeenko store: https://www.aliexpress.com/item/4001274404758.html -- For more info on the tinySA go to https://tinysa.org/wiki/

(sry for this being my first post but...) XYL of a ham friend want's to gift her OM a TinySA from SeeSiiTools Store as advertized on Aliexpress. I find SeeSii only "on amazon"... Can I tell her that:

it could be the 780MHz signal is in short bursts missing the sweep of the tinySA you can try to set zero span at 780MHz so its as fast as possible There are some EMI test experts in this group, maybe

Sorry, Unit is my medical device (308 nm Laser) Device are your liteVNA and tinySA The frequencies that are not compliant (~780MHz) do not appear in my tinySA Is there any application note or white

Unclear what "my unit" and "this device" are -- For more info on the tinySA go to https://tinysa.org/wiki/

I am testing my unit for 60601 for conducted and radiated emissions CISPR 11:2009 and was wondering if this device can be used to detect frequencies emitted by the unit (like an RF? sniffer) Thanks I

Sorry, I do not understand the problem -- For more info on the tinySA go to https://tinysa.org/wiki/

I purchased the liteVNA and the tinySA to use as an RF sniffer. I am having compliance problems with Radiated Emissions and was wondering if there is an application note or something else that I can

Eric, I noticed that having BIG NUMBER selected, the communications with the console sometimes do not work properly when sending a block of more than 3 commands, causing tinySA to crash or white

Hi Erik. Please see the attached... It’s the same information in both txt and xlsx files, just in case the Excel spreadsheet is blocked... I’ve run through all the commands from the “help”

Are these the only important missing? That can be solved. -- For more info on the tinySA go to https://tinysa.org/wiki/

Hi Erik. Thanks for the reply. Yes, some do some don’t… rbw and sweeptime sadly don’t. Chris

Use the help command to list available commands and try them without parameters. Some may return the current setting -- For more info on the tinySA go to https://tinysa.org/wiki/

Hi all. Is there a command to retrieve the current setup of parameters such as rbw, points, sweeptime, etc? Best regards, Chris.