开云体育

Updating my tinySA with the firmware of december 10th. Using?DFU_LOAD_BIN.bat (which uses dfu-util-static.exe) it is extremely slow. The erase already took a long time, it stays long at 0% and then

Erik, I just ran it at 290 points per scan and probably got a couple of more minutes before it disconnected (about 12 minutes vs. 10 minutes). -- Ed, K0KC k0kc@... http://k0kc.us/

Hi, -I'm testing with a Yaesu FT3D Handheld Radio and a Baofeng UV-B5.? Both give me similar readings. -Testing on 146.52 MHz -Low input -I did Config - Level Cal with both inputs connected as

Erik, I know that 500 points per scan results in the problem and I think that 1000 points per scan also results in the problem. I have not tried other values. -- Ed, K0KC k0kc@... http://k0kc.us/

Thanks Erik. I'll do that. Purchased at Zeenko.

3dB difference is 50% difference in power so the power reading makes sense versus the dBm reading What is a HT? What frequency? What tinySA input are you using? Did you do a level calibration for that

I can replicate the problem. Does the "Points per scan" setting have an impact on how soon it hangs? -- For more info on the tinySA go to https://tinysa.org/wiki/

Herb, I let the TinySA Ultra run this morning and it disconnected after about 10 minutes of apparent normal operation. I am still running firmware 1.3-512-gd99d679 built on December 3. I updated to

Hello, How accurate is the tinySA measuring/calculating power readings?? I have an HT that is set to High and reads 5 watts on a Power meter.? When I hook it up to the tinySA using a 10W 40dB

You will not be able to measure harmonics that way.? Coupling between the transmitter antenna and the tinySA and its antenna vary wildly with frequency and as the distance between them varies.? You

Contact your seller -- For more info on the tinySA go to https://tinysa.org/wiki/

See the specification in the wiki, search for the word "below" -- For more info on the tinySA go to https://tinysa.org/wiki/

My TinySA Ultra +TinySA App v1.1.20.1 on Windows 10? (64b) behaves very similarly. Mirek Dne 09.12.2022 v 23:45 mike napsal(a):

I will only use it in standard mode and am working my way through the youtube videos. Wow what a piece of equipment at a great price too. Andy G4HUE

New FW release for tinySA and tinySA Ultra Version V1.3512 Changes: - Added SAVE STATE switch to PRESET menu. If disabled the last state not be saved over power cycle - Added LOAD DEFAULTS to PRESET

Hello, all. I just received my Tinysa yesterday. I spent several hours playing with it. I’m not an EE, just a ham radio operator. I plan to use the Tiny mostly for: * Checking my transmissions for

Hello, Just got today my new TinySA Ultra, but unfortunately the touchscreen is completely unresponsive. I can still control it using the jog button, but it is really hard to operate it this way.

No. It stores screenshots and configuration setups. Larry

I don't think this has been covered, but will it be possible to do FW updates via the microSD card?

To add to the test results Using TinySA App v1.1.20.1 on Windows 10 and TinySA Ultra - TinySA4 - HW V0.4.5.1 - firmware V1.3-512 Connect via Com 4 - 100 to 137 mHz scan Stops after approx 10 minutes,