开云体育

I'm not having problems sending/receiving the BMP screen captures using Gmail and Outlook. It is a 16-bit image and I'm running Windows 10.? The Windows image viewer works fine with it.

If you can open the screen grab on your computer you may be able to do a screen capture on your computer and save that capture as jpg or png file Most document editing software will allow importing of

I do not know much about this topic, but I have been trying to share ULTRA (or NANOVNA) screen shots via email with some friends.?? The images never appear they just see the filename. I have come to

My suggestion is to first put the rig on battery, then cut power at the mains panel. ? Then, while listening on the frequency you note the RFI on, see if it is there. ?If it isn’t, turn on breaker

Thanks Martin. My Nano VNA is still original, 0-950MHZ or so, I never did any firmware upgrades. It worked well, so I left it alone ;-) 73 de Andy

The error message is now clearer: 'capture error - does the device support the "capture" cmd?' I also added better device type detection (name and screen size) - GitHub updated:

Hi Martin. As it started before Christmas.... Has anyone still got their Christmas lights on? Cheers Ian/MI5AFL

I should have clarified this point with a bit more detail. What I meant to say was that it is rare to have a situation where only the H or E field component exists. In most cases you are likely to be

Hi Martin, Yes understood. Good luck with your interference hunting. One tip. Wear a high Viz jacket if you are walking around the neighbourhood with an antenna and box of tricks. No one pays any

I think it it the other way round :) - The old firmware doesn't allow remote control, but you could try a firmware update that also provides other useful functions.

I've done nothing yet apart from a quick experiment with the Xiegu to see it that would help to search for it. I cannot easily rotate the loop without relocating it - it is pinned to a garden fence

Thank you Klaus

You can use sweep center {freq} and sweep span {width} -- Klaus, DL5KV

Hello, I would like to control the tinySA ultra for measuring the power value(peak) at 868MHz?via serial commands. How to set the start and stop frequency? Or is there a command to set center

The following files and folders have been uploaded to the Files area of the [email protected] group. * /TinySA Ultra Menu-Tree Chart - v1.4-40 - Updated January 28, 2023.pdf (

Most likely the loop is much closer to the noise source or the noise source is almost pure vertical polarization and the loop which is probably vertical can hear it while the dipole can’t. ?I have

Maybe in the near field this could be true, but that diminishes fairly quickly. Loops tend to have better common mode rejection than dipoles, and this often the reason they appear to be less prone to

email is bouncing, hope this works Mike C. Sand Mtn GA

MartinMy understanding is that loop antennas respond to the magnetic component of the EM wave and dipoles respond to the electric component.? In your case, I'm not sure if the distance to the source

Hi Martin, I realised my mistake soon after posting, the leading / for the comport was missing. To be honest this test was part of a something I abandoned many months ago on my Linux Mint 20.3