开云体育

Thanks. Good remark. It's indeed maximum 290. But there is an option to select less sweep points -- For more info on the tinySA go to https://tinysa.org/wiki/

Better: " As the number of points displayed is 290, when the RBW is too small to cover...."

Hello, In the https://tinysa.org/wiki/pmwiki.php?n=Main.FREQ I read the phrase: The number of points scanned is *minimum* 290 but when the RBW ( https://tinysa.org/wiki/pmwiki.php?n=Main.RBW ) is too

Thanks!

Thanks for this. Looks like a wealth of information!

You can use the pause and resume command. When in pause mode a big green PAUSED text is shown in the status window -- For more info on the tinySA go to https://tinysa.org/wiki/

Also, the TinySA will stop his own sweep, when the raw command is sent through the USB/RS232 protocol. Once the raw command finishes its sweep, the TinySA resumes what it was doing. But since my

Hello, Please e-mail me directly with problems regarding my software - this group should be use for the TinySA devices only, as per request from Eric, which I respect. The mentioned problem results

Dieter, try english as? Windows language. Toni.

MARKERS/MODIFY MARKER You can enable up to 8 markers All of them can be auto tracking -- For more info on the tinySA go to https://tinysa.org/wiki/

Kinda new to the tinySA Ultra. Is there a way I can have multiple markers active and labeled on the device? I see 3-5 major spikes on my display with a 30in antenna attached and wonder if they are

LV Zeners make wonderful noise sources. Dave - W?LEV wrote: -- *Dave - W?LEV*

But then, noise sources are easy to build and used externally or bought cheap on the internet. Why bogging down the TinySA with it?

Try TinySA app. If that works contact Vitor.

One more observation is that the VMA frequency axis labels are showing 1Hz? ? 1Hz? ? 1Hz? ? 1Hz ......... even though the frequency settings are correct and the displayed active spectrum is

Thanks for your quick reply. Tried another USB socket on my Thinkpad laptop. No change. same problem. Cable is original as supplied.

Try a different USB port or cable -- For more info on the tinySA go to https://tinysa.org/wiki/

Just got a brandnew TinySA from the recommended dealer at Ali Express. I use it with VMA TinySA by Vitor. When I press start, the spectrum display shows a full sweep. However the TinySA keeps on

Colin, its an interesting idea. To be investigated in case a substantial HW update is planned, which is not the case at the moment. Space will be a problem, also power and cost. -- For more info on

Erik I was just wondering if possible a noise source could be produced from the Cal output to connect through a dut to look at its spectrum? - even if a bit rough, just to get an