开云体育

It needs to be remembered that the whip part of the antenna, is only a part of the antenna. The other part is the case of the instrument and whatever else the case is "connected" to, i.e. it's the

Commercial cable manufacturer specification sheets often identify the minimum bend radius for the cable. ? ? In my professional experience, stranded conductor coaxial cables generally fall into to

See my quick NanoVNA screenshots, measured with the?tinaSA original antenna: minimal length (9 cm) maximal length (30 cm) For FM radio or 2m band I would take a longer antenna, or just order a

You can choose any length you like. For low frequency RFI hunting a long antenna is better The length determines the "optimal" frequency range it will receive. A quarter wavelength is optimal. -- For

Not at all you are the first, the antenna is a very weak part and exposed to everything, no matter how careful you are. The cheapest ones, you can find them on Aliexpress, for

Thanks. At least I don't feel like the total noob I am now. I am in Kenya i.e. Africa and bought my ultra from the Zeenko store on aliexpress.

Thanks. Does the length, number of sections, etc matter when selecting an antenna?

No, you are in a long line of those that has done that. Where are you located? Clyde KC7BJE

https://www.ebay.com/sch/i.html?_nkw=sma+male+antenna+telescopic -- For more info on the tinySA go to https://tinysa.org/wiki/

Hi, I must be the first to have snapped my antenna. Totally my fault - fell asleep on it. Is it possible to source just an antenna replacement?

ALSR100, similar in structure to TIMES MICROWAVE SYSTEMS' LMR100. http://www.cnals.com/eng/contents/96/48.html https://timesmicrowave.com/cables/lmr-100-pvc-coax-cable/ (

This might be a question for Erik. What is the cable manufacturer and model shipped with the TinySA Ultra? I'm interested in the bend radius for purposes of putting the Ultra and various accessories

Hi Martin, István has a point. The short description of the firmware fixes and changes was very helpful for endusers. The shorthand at Gihub is no replacement. André

You're right, I should reduce that keypad size!? It wasn't a problem till I ran into that page where I went left to fit things in :-)

Thanks Dave, I appreciate your effort. May be simpler to keep the flow, top-down and left to the right.? not down, to the right, then to the left and down. The numberic keypad could be reduced in

See the history at GitHub: https://github.com/erikkaashoek/tinySA/commits/main

István, The CRC is different because the build time is different and also the compiler versions differ, Erik uses an older version. Both infos are stored as strings in the binary file. $ strings

Dear Erik, what kind of change You made in the firmware, from version 1.4-33? @Ho-Ro Your files not identical, for exampe: http://athome.kaashoek.com/tinySA4/DFU/tinySA4_v1.4-36-g434126d.bin (look

Thanks, Martin. Downloaded and installed. Erik's still isn't correct at 11:20 UTC. David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email:

Netwerk problems appear to be solved -- For more info on the tinySA go to https://tinysa.org/wiki/