开云体育

The jog wheel is on the back side of the PCB and the display on the front side so they can not touch. The PCB is fixed in position with the 4 case screws so it can not move. It is possible the jog

My 2 week old TinySA developed this issue after a few uses. Is it just me or is it caused by using the jogwheel? I noticed that when selecting an option by pressing down on the jogwheel sometimes

Really impressed by the TinySA family, unthinkable just a few years ago, and totally grateful for the involvement and quick support response. Congratulations Erik & team for your ingenious development

Thanks, last week i did try the same with this: Waveguide opening and black stamp on the back tells me X band. I measured a nice curve when increasing the voltage. But I could not find a trace with my

For troubleshooting and repair I prefer a fast reacting scope, like my old Tek 465. Also for its overload stability. For adjustments, serial digital measurements and documentation I prefer my

https://tinysa.org/wiki/pmwiki.php?n=Main.UpdatingTheFirmware -- For more info on the tinySA go to https://tinysa.org/wiki/

Title says it all.? Thanks and have a very merry Christmas.? Gordon

I see a teletype, that's cool. So this old system has one big advantage over the TinySA, it sounds cooler ;-) All the Best, Isidro Am 15.12.2022 um 02:31 schrieb DAVE REISER X-WA3TRS:

I'd go with the Siglent.? I have a Siglent SDS1104X-E.? Only 100 MHz, but four input channels.? I considered getting the 200 MHz version, but most of the time if I need to look at something above

Thanks Eric, You saved me some time there, I don't need a tracking generator for the ultra it would have been something to play with to see if it can be done nothing more. I build one for my R3465

Each is a different tool for different tasks and all three complement each other. IMO every bench should have at least one scope. In the past I have used a 2235 daily and found it to be a decent tool.

Steve, I have the prior model that is 100MHz and does not have the FFT capabilities of the SDS1202X-E.? The digital capabilities that include screen capture and math are huge.? I am unfamiliar with

Since there are not many video's ( yet ) we uploaded a small clip with the Ultra receiving a 10 gHz microwave motion detector tuned to ( i had to find the signal first and brought it up from 9 gHz to

Kurt My experience was after conducting the top left corner calibration touch the lower right corner arrow never appeared and the touch screen was then unresponsive with recovery only available by the

To show you how far we have come, I must show this picture again. This is a spectrum analyzer I built for INTELSAT while I was working at COMSAT Labs in Maryland, circa 1970. Please note that there is

Dave Reiser would like to recall the message, "[tinysa] A round of applause!".

To show you how far we have come, I must show this picture again. This is a spectrum analyzer I built for INTELSAT while I was working at COMSAT Labs in Maryland. Please note that there is a spectrum

Hi Martin, I am trying to understand this, what is the best method to get the V4.3 branch to match Erik's current (latest) code? Do you need to add a tag that points to the latest commit hash?

Hear, hear! I’ve been thinking the same thing, but couldn’t have put it so eloquently. The device is one of the highest ‘bang for the buck’ products aimed at those who work with RF, and it’s

I fully believe that Erik deserves this! https://www.designnews.com/electronics/designcon-2023-engineer-year-nominations-are-now-open