开云体育

With my TinySA Ultra it works, but the noise level which is -90 dBm on the TinySA is shown as -45 dBm in NanoVna-App 1.1.211. Am I doing something wrong? Mirek

Erik, When making the most accurate measurement on the HP spectrum analyzers that I have used, the best practice was to change the reference level to bring the measured signal as close to the top grid

When I look at your picture, do you still have the protective film on the display?

Thanks for the code. Seems ok For the problem with the touch contact you supplier -- For more info on the tinySA go to https://tinysa.org/wiki/

I update NanoVNA-App https://github.com/DiSlord/NanoVNA-App/blob/main/Win32/Release/NanoVNA-App.exe to 211 version Now it can detect tinySA ULTRA and correct made screenshots (remote display also

Just update mine, touch-screen still not responsive and the code you asked is 169:

I should have realized it was a misprint, but I hadn't upgraded to the latest FW yet.

Water Fall ? NanoVNA-App can't do it.

confirm - Thanks Erik for the fast solution Wolfgang

As i see software not correct made screensots (lost first byte and swap pixels color) Visible this artefacts on zoom: NanoVNA-App and TinySA-App made correct dumps

Jorge the zeenko store on aliexpress has 22 units in stock, at the rate of 20 per day you have to be quick; 168.15SG$ |New Item Hand Held Tiny Spectrum Analyzer Tinysa 4" Display With Battery -

The following files and folders have been uploaded to the Files area of the [email protected] group. * /Get_ScreenSE.zip ( /g/tinysa/files/Get_ScreenSE.zip ) *By:* Aleksander

/g/tinysa/files/Get_ScreenSE.zip For Ultra enable H4 option.

Now it works. Thanks. -- Klaus, DL5KV

Now I optimized the calibration points and calibrated with a R&S SMA100A. After Calibration I wobbled it. The SMB100A can only operate to 3.2GHz. The wobble results after self-calibration: The

There is no change log apart from searching for "new FW release" in this group. The only change log is in github I do not do releases in github Up till now SW updates have always been backwards

On Sun, Dec 11, 2022 at 08:00 AM, DiSlord wrote: > > tinySA as NanoVNA use color command for change color: > color {id} {rgb24} > > id - color palette index: > >> LCD_BG_COLOR? ? ? ? ? ?

A misprint. Should be "LOAD BMP".? Loads a stored bitmap file back to the screen. Herb

tinySA as NanoVNA use color command for change color: color {id} {rgb24} id - color palette index: