开云体育

I was under the impression that I had ordered the Ultra through Zeenko, but when I received the order it said it was through the Geek seller which is why I questioned it. I am in the process of

Thank you. This is what I was looking for. I am not too concerned about updating - DFU mode. Just being able to capture screen on the PC. Dave - W?LEV [email protected]> wrote:

You have to be very careful when you use a wideband noise generator as a substitute for a tracking generator.? The reason is that the tinySA and tinySA Ultra? have maximum input power limits of +10

Check this https://tinysa.org/wiki/pmwiki.php?n=Main.PCSW [email protected]> wrote:

check this [email protected]> wrote:

If you mean the firmware update procedure the answer is Yes. Same drivers as NanoVNA for serial port data exchange and DFU firmware update. There is only one app and it is called tinySA app and it

Yes Clyde KC7BJE

I received the email yesterday stating my TinySA Ultra shipped. UPS delivered it today.? The display a little loose on the top. Gentle pressure on the edge of the display solved the problem.? Time

Is the TinySA Ultra with the 4" screen supported with SW/FW over USB much line the NANOVNAs? -- *Dave - W?LEV*

Zeenko is the valid store in Aliexpress: https://es.aliexpress.com/item/1005004934403303.html?gatewayAdapt=glo2esp

You guys got me thinking (understand I'm very new to spectrum analyzers).? Comments were made about tracking generators, noise and other types of wave sweeps.? So I found on my Feeltech FY6600 a

Thanks Erik, that is what made me query it.

That sounds like a useful feature.? I hope you add it... Roger

Better not buy from any AliExpress store with 'tool' in it's name -- For more info on the tinySA go to https://tinysa.org/wiki/

Ordered a TinySA Ultra from AliExpress yesterday, having checked it was from one of the approved sellers on there. Went and looked at the status today and see it is being supplied by Geek Selected

Can I plug Iphone earphones (TRRS) into the Ultra? Most devices I own that have a stereo jack have no issue with IphoneTRRS plug Just curious Rich

The input level does not impact level accuracy as long as you do not get the red markers signalling possible overload or the red "reduced level accuracy" warning. -- For more info on the tinySA go to

Perchance I simply missed it but, for the best accuracy, what would be the best input level for the lower input? ?With my new coming Ultra, what would be the best level? As an aside: ?I don't know

Thank you for the explanation! Mirek Dne 07.12.2022 v 15:57 Erik Kaashoek napsal(a):

An alternative mixing plan in general is not possible. Depending on frequency and RBW, specific alternatives may be possible but validating these in a generic way is too much work. Using the console