开云体育

Ham Radio Crash Course posted a video showing the tinySA https://www.youtube.com/watch?v=o4CnecfAzng&feature=youtu.be&t=928

Apologies if this is not the right place to ask… I was wondering if TinySA would help to look for sources of potential radiated EMC problems with a NF probe. I imagine setting it up, making changes

On Sat, Aug 29, 2020 at 07:52 AM, Erik Kaashoek wrote: See here: https://tinysa.org/wiki/pmwiki.php?n=Main.MODULATION ... The dynamic range in this setup is limited due to the reverse leakage thru

Hi Erik Works great, thank you Kind regards Kurt Fra: [email protected] <[email protected]> P? vegne af Erik Kaashoek Sendt: 29. august 2020 13:39 Til: [email protected] Emne: [tinysa] New FW

After some feedback an updated video was posted https://m.youtube.com/watch?v=VjqbMDNlCBs

Thanks Erik, The two tinySA tracking generator set-up is totally understandable now.? I noticed one spelling err ... The dynamic range in this setup is limited due to the reverse leakage true the

See here: https://tinysa.org/wiki/pmwiki.php?n=Main.MODULATION

IMSAY Guy posted two review video's on youtube https://www.youtube.com/watch?v=n6WEM3--Npc https://www.youtube.com/watch?v=xFtF2AYT0iQ&t The comparison is done to a HP8921A spectrum analyzer,

Not sure what the best quality and most cost effective "tiny" oscilloscope and small digital multimeter are on the market. Any suggestions that are best to pair with the tinySA and nanoVNA?? ?My

Steve, Several members of my ham club purchased two tinySA's so that one of them could be used separately as a sigen/tracking generator.? The HBTE group (home brew test equipment) recently added a

Hi Erik That was a quicky, thank you. I can manage to re-record the news in the video (some 50 minutes long) as I will use it tomorrow at a HAM Event 350km and 3.5hours drive away, so I leave at 6

Hi Erik Super, thank you for the responces. Yes that is better as which ref level to chose depend on what to expect will happen Kind regards Kurt Fra: [email protected] <[email protected]> P?

New FW released Version v1.0-62 Changes: - Bug solved: trace store command not working - Bug solved: Overload flashes in normalized mode - Normalize activation now asks for reflevel and sets reflevel

May better to ask for ref level after normalize action. If you want the normalized level at the bottom you enter 80 if you want it at the top you enter 10

I think the Wiki has bloomed since I last looked at it. I did not realise the sa could do all that. Especially such a range of attenuation. Another 40db (from an external attenuator and one is

So, after hitting the normalize button a keypad screen to ask for which level to normalize? And should the reflevel be set such that the normalized level is in the middle of the screen? So reflevel =

Hi Erik Thank you, indeed that would cure the problem. Have you considered to include normalization to a used defined level ? to allow a better view for level changes going below the 0 dB line at the

Hi Herb Thank you for the comment. As Erik respond it is a bug as 0dBm is a warning level. In my video I demonstrate the Normalization by Normalize to no input signal (the noise floor) and then

This is indeed a bug as the overload warning should trigger on the actual input signal and not on the normalized level

Kurt, Erik added the normalize menu option when I was trying to duplicate his tracking generator set-up during beta testing.? In the standalone mode, I use it as a quick check of any attenuator or