开云体育

Hello, I was wondering if it would be possible to add an option to rotate the display 90 degrees on the Ultra? The display on it appears about as tall as the original is wide, so I wouldn't imagine it

Erik, It is OK now. Thanks! Mike

It's the little things.... wrote:

I got mine from R&L today. No need to straighten the screen. Like yours, the lettering is not highlighted. I haven't tried doing the firmware update yet.

Hi all!Happy owner of two TinySA originals here. Just ordered the new Ultra on 11-30 from the Zeenko store on AliExpress. Got the shipping notice today (12-1). Looking forward to receiving it soon to

Running a naked laptop (no protections), I was able to download the files for both the tinySA and the tinySA Ultra and update the FW without issue. The unit I ordered from AliExpress had a crooked

KO now? /g/tinysa/message/8170 -- For more info on the tinySA go to https://tinysa.org/wiki/

Hi, Unfortunately not.

Please follow the link to the groups.io/g/tinysa/messages website, there the pictures are included -- For more info on the tinySA go to https://tinysa.org/wiki/

Erik, pictures are missing in your mail. Best regards Mike

Erik, In an ideal world that would be how it works. But not in my case. I’m in dentist chair at the moment. I’ll try with a different computer later today. Also, Malware Bytes software really

Hope this helps Start STM32CubeProgrammer and click on the button in the red circle. Make sure "USB" is selected in the button left of CONNECT and click on "No DFU" to select a USB port listed, you

I'm trying to update the FW in my original tinySA before the Ultra. In STM32, first I get the readout protection message. I check the "Read Unprotect" box but then the program tells me to power off/on

I ordered mine from them on Nov 9th and received it today. Seems to work OK :-) Jacon

Thanks Eric, bought my sa4u on 1 dec from zeenkoo store, they have 137 units in stock fyi, Watching all the video's now. Vol verwachting klopt ons hart......

Guys, Many thanks for all your responses.? I think you have more than adequately answered my question.? Well done on the product release.? I suspect that the increased resolution will excite many

and with some IMD caused by overloading the built-in LNA. Do NOT use the LNA when doing IMD measurements and set to maximum internal attenuation -- For more info on the tinySA go to

That's OK -- For more info on the tinySA go to https://tinysa.org/wiki/

New FW release Version 1.3510 tinySA Ultra only Changes: - Time/Date added to status panel - Small change to prevent selftest 7 from failing incorrectly. -- For more info on the tinySA go to

I ordered mine from them on Nov 9th and received it today. The lettering is not highlighted in white so I don't know if it's the real thing or not...gotta find time to check it out. Tim K4SHF wrote: