开云体育

I've been exploring the menu, and think I've found some other behaviors that seem improper. 1) The JOG STEP function doesn't work as expected. When set to anything other than Auto, it seems to always

Its a known problem which I did not yet give enough priority to solve -- For more info on the tinySA go to https://tinysa.org/wiki/

Can confirm this behavior (tinySA_v1.3-347-g31eb02e): I see this white line when clicking BACK in one of the following menus: - LEVEL - TRACE - MEASURE - CONFIG To me it looks like the problem only

Hardly worth mentioning, but some menus: LEVEL, TRACE and CONFIG, and some submenus, leave a line just beneath the grid when BACK is selected. (Ver. 1.3347)

Thank you. And sorry for causing you additional work with the second PR just now. Regards Christian

Yes. Github is the right place. Will react. -- For more info on the tinySA go to https://tinysa.org/wiki/

Hi, I recently posted a "pull request" on GitHub: https://github.com/erikkaashoek/tinySA/pull/27 ... to fix two (minor) bugs that I encountered in firmware v1.3-347:

Erik, Toni @ Martin, I didn’t realize that low-Z phones are sensitive enough. I just tried a pair connected in series, and confirm that volume is adequate, and that a 3.5mm jack would be preferable

Another method of mounting a 3.5mm socket. /g/tinysa/message/4045 Regards, Martin

Terry, good work. Consider, however, knowing that there is enough level for a headphone, that there is enough room for a small 3.5mm jack socket. Even using just the two live terminals of the socket,

For those that consider to add the audio out. The output level? is loud enough to directly connect a cheap headset. Perfect for hunting RFI -- For more info on the tinySA go to

Rudi, Great idea to use the USB connector for audio too! I doubt if my hand is steady enough anymore for that though. I’d probably solder bridge the whole connector. My mod uses thru-hole

I finished the Listen mod, and I’m happy with the way it turned out. The connectors are common Molex, like those used in many Heathkits, which is why I had some in my junkbox. I saw no reason to

If you search the group you will find the post mentioning development of a 4" version is ongoing but taking longer than expected because some small improvements where required. Current supply and

My wish is that a 4.3" version of the TinySA TFT Color display could be released. My NanoVNA 4.3" screen is easy to see and use the touch screen. Comments group Dennis -- *Dennis,

The bottom right pad of the four empty pads above the processor, left of LDO1, is audio out Top right pad??is ground -- For more info on the tinySA go to https://tinysa.org/wiki/

Hello Terry, have a look at my Audio Listen documentation: https://www.rudiswiki.de/wiki9/TinySA-Listen 73, Rudi DL5FA

Now I see R7, but a picture of the mod on this layout would still be helpful. (Is this the current layout, or an older one?)

I think I have an easy way to solidly mount a readily-available connector for the Listen function, but my PCB layout is different from the picture on the wiki that shows the mod. For example, I don't

Hi Erik, It is not a problem for me. For testing i can re-install the previously used version V1.3330. Thank you for your fast answer. -- Bert W