开云体育

Type ZK10 into the search box. "Mike C. via groups.io" <mg@...> wrote: -- 73 -Jim NU0C

Very interesting. It works for Canada. But indeed? it does not work for USA, UK, France, Spain...

That link does NOT work. Mike C. Sand Mtn GA

They are listed - https://www.aliexpress.com/item/1005008670985678.html I doubt you can use the BGA2817 instead. They have a different pinout, and the powering method is not the same either. In the

So.. I received LNA's (BGA2817), but it turns out i need Zeenko's ZK10D. They are not listed on theirs aliexpress store. I wrote them, waiting for answer. Is there any way to bodge BGA2817 in there?

Correct -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Is "Brightness" only on the bigger models? I don't see "Brightness" on the TinySA Basic. Brilliant device. I used to have an HP141T with all the band plugins and then replaced it with a Rigol (up to

A GOOD PRACTICE: Whenever I pick up the end of a coaxial cable, I *always *hold a finger across the end "shorting" the center conductor to the backshell before connecting it to anything. Doesn't

Some years ago I helped chase down an interferer whose signal was drifting through the input frequency ranges of a bunch of 2-meter ham repeaters in our area.? It came and went, and when present had

Short the SMA central pin with the outside of the SMA plug. No ground needed. -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Yup. DaveD KC0WJN [email protected]> wrote:

Add to this list people who routinely mix up "B" for bytes and "b" for bits, especially in the networking part of the computer world.

Dave, W0LEV, is correct. The metric prefixes are well-defined. See https://en.m.wikipedia.org/wiki/Metric_prefix for a list of them. One of the ones that people screw up is milli (m) vs. mega (M).

Yes, I have one generator that goes to ?Hz. But I'm not a typical ham by any means! If you build yourself a seismometer, you're in the mHz region. Dave - W?LEV [email protected]> wrote:

Hate to burst your bubble Dave, but the HP-3561A , in their documentation, refers to the low frequency coverage (micro Hz) as uHz, and how about kHz. So, yeah, mHz for "mili Hz" works for me but hey

Yea, Don, get the newbies to use proper abbreviations! I've called it out many times, but it seems to fall on deaf ears and clearly never reaches the gray matter. What really gets my goat is "mhz".

One word. MOVE. Mike C. Sand Mtn GA PS Better yet, drop a #10 gauge wire straight out your window, shove it into the ground (bare) then connect the other end, 'CAREFULLY', to your ground lug on the

I am very unfortunate in that my townhouse has both dirty electricity and dirty ground in the outlets. I had been using grounding mats/ sheets in my bed. After some testing I found out that current

I can attest to that for sure (discharging cables). As a lead tech, working for uncle sugar many years ago at NNSY (Norfolk Naval Shipyard), I was assigned to re hook-up a long wire antenna on top of

My observation is that very few people use units of dbW even when working at high power, dbm (relative to 1 milliwatt) being far more common. If a colleague started using dBW I would ask them why as I