开云体育

Had the same issue, I found if I set the marker to frequency mode then changed back to peak it worked ok. Dave

Thanks Ian... I added some other functionalities also, so when testing is finished, I will create a new POST with a more meaningful subject description. ToniZG

Hi Juan & Xavier, It seems it connect to the tinySA (basic) but it doesn't plot anything. The tinySA Ultra (without +) worked a bit. The FM band preset show 87.5 till 102 MHz not 108. Waterfall and

Suggestions for improvement: Display IF and video bandwidths and attenuator settings on the screen It is customary to have the frequency legend at the bottom of the screen. Best regards ,Don Brant

Hi Juan There is commands available to activate carious modes As far as I remember q p disable the various modes Kind regards Kurt Fra: [email protected] <[email protected]> P? vegne af

Use the 'help' console command to get a listing of all available tinySA Ultra commands. For controlling the LNA: lna ? ? ?usage: lna off|on Herb

Hi, It connect correctly to my tinySA but nothing to see in the spectrum window Perhaps the protocol is different? Greetings Kees [email protected]> wrote:

https://xrjunque.nom.es/swdownload#winspectrum Regarding the preamplifier control, there is no USB command to enable or disable it remotely. It must be activated manually on the device. 73

https://xrjunque.nom.es/swdownload#winspectrum Yes, WinSpectrum III should work with TinySA Ultra (non-Plus) and TinySA (non-Ultra) since all share the same VID and PID. However, this has not been

https://xrjunque.nom.es/swdownload#winspectrum Yes, WinSpectrum III should work with TinySA Ultra (non-Plus) and TinySA (non-Ultra) since all share the same USB "VID and PID". However, this has not

Clean link: *https://xrjunque.nom.es/swdownload#winspectrum* Dan! you are not ?alone! We needed double expresos to realize that the link was wrong! Anyway No worries! We all are to young to get

Greetings All, Is it compatible with the original "TinySA Ultra" (ie without the "+" suffix)? 73 Tom VA7TA

... and it's "by the way"! LOL

Hi, It's a nice simple & clean interface, well done, and thanks for your efforts. My only observation is that I can't seem to control the pre-amp in the settings menu, but maybe I'm looking in the

Its ye gads bye the way ? we are all getting older (Mike 75 and 50/52 weeks)? ? -------------------------

I got a second coffee and NOW see the link!? Gads, I'm getting OLD-er... -- Dan N1DH Middleboro MA

Does it work with the non-Ultra tinySA ? --Jim

Hi Thanks for this cool program!? But I think I need more coffee...? I don't see a download link in this message -- 73 Dan N1DH Middleboro MA

Hello and many thanks Juan (M0WWA) & Xavier It works very well! The link was good and Virus Total gives the software a clean bill of health Regards Ian VK3YCQ

It’s in the email notification that I got. ________________________________ Sent: Monday, March 10, 2025 10:23:41 PM To: [email protected] <[email protected]> Subject: Re: [tinysa] WinSpectrum III