开云体育

the TinySA and also the nanoVNA are often used in TV series! I spotted a nanoVNA used to debug an alien RTX !!! the series was Roswell.

Hi Erik, and did they find them :-) ?If so you have to turn on the production to have enough in stock. You should be proud to see you own amazing product om TV thumbs up 73 PD2AM André

Geoff, In the role I use the TinySA Ultra, it is constantly in the vicinity of inhibitors of varying strengths and so far they have had no impact on the system. Obviously I don't use the TinySA Ultra

I have seen discussions about high RF levels damaging the TinySA even when it is turned OFF. So I have to wonder when the TinySA is in shipment if it is being subjected to RF levels that could destroy

Thanks for your help. I've only had it for a few days and bought it from the approved seller on Amazon. So I'm hesitant to start repairs on this new device, since I might actually damage it and make

No dispute needed. The HW is OK/ Something in the FW makes it fail, just try again and all should be OK when it succeeds. Let me try to find and repair this annoying FW bug -- Designer of the

Hello, I bought a TinySA Ultra from Zeenko Store, and I'm having an issue. Calibration doesn't always succeed—it might pass once, but then fail several times after that. However, the self-test

Last night I was watching the TV show "The Curse of Skinwalker ranch" (Serie 5 episode 9) and they used de Tiny SA Ultra to find anomalies in the area.

This may help: Open the case Release the latch of the LCD cable Carefully try to reseat the cable and close the latch -- Designer of the tinySA For more info go to https://tinysa.org/wiki

My new TinySA is having touchscreen issues. I have repeatedly done the touch calibration. When I do the touch test, I can't draw vertical lines, only horizontal lines. I can't use the menus and have

I found out how to exit the Mode menu by pressing "Return to LOW in". So disregard my last message. Geoff

Doh! Thanks

I am very new to the TinySA, having just received it yesterday. I am trying to follow the instructions in Erik Kaashoek ( https://www.youtube.com/@ErikKaashoek ) 's video "tinySA Frequency Correction"

Touch a marker -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Can't find anything mentioning this so far. Using marker to cf on frequency menu changes the jog wheel to a span jog, quite useful when zooming in on a peak signal. Bottom right span value has a

No, its not all CPU. If you're a digital type, that may seem be the weak link. However, it is not. Swepting too fast through a narrow filter will alias and misrepresent the signal. On the screen

From specificatiins I would assume yes. It seems everyone wants faster scan times. Is it just down to CPU? Is it an upgrade that is reasonable? This device is really important because it is

Same processor?

I too had the same problem. Reloaded 177 with success.

No -- Designer of the tinySA For more info go to https://tinysa.org/wiki