开云体育

Hi Erik. I tried firmware versions back? one at a time to tinySA_v0.1-40-g27313d4 where I no longer see the pulses as in the picture, just a flat line that sees no signals, even after a calibrate

Martin Here you can find all old FW's http://athome.kaashoek.com/tinySA/DFU/old/ Suggest you go back to older FW and try to find per which FW things go wrong -- Designer of the tinySA For more info

Hi Erik, Yes I tried CONFIG/LEVEL CAL with the two ports connected with a short SMA lead. then I have done a RESET CALIBRATION followed by CALIBRATE I can see the unit go through the process, but

Martin, did you try a calibration? -- Designer of the tinySA For more info go to https://tinysa.org/wiki/

Thanks for the super quick response. Just done a CONFIG/MORE/CLEAR CONFIG? then 1234? enter. sadly the unit has same issue after that procedure. I wish I had made a note of the original formware

The image suggests a failed calibration, possibly caused by updating the FW and not doing a CLEAR CONFIG Can you try a CONFIG/MORE/CLEAR CONFIG? -- Designer of the tinySA For more info go to

Hi.?? Has anyone seen this issue before ? My Tiny SA is original version 0.3 hardware purchased a long long time ago... Was working OK with no problems but had original firmware in it, so I devided

Push the jog switch to the side (not down) and switch the tinySA off and on, release the jog switch If this removes the weird spikes in the regular scan do a CALIBRATION and run the

I've had my TinySA for a year or so now, and it's always worked well. Yesterday I looked at the signal from my UV-5R by leaving the sockets unconnected - just the yellow end caps on them! It worked

I've had my TinySA for a year or so now, and it's always worked well. Yesterday I looked at the signal from my UV-5R by leaving the sockets unconnected - just the yellow end caps on them! It worked

Yesterday, I tried Putty, but it didn't work. However, after a cup of tea, a refreshing sleep, and your message, I decided to take another look at the connection settings in the tinySA configuration

Can you try if a terminal emulator SW like Tera can connect to the tinySA serial port? -- Designer of the tinySA For more info go to https://tinysa.org/wiki/

I'm having trouble connecting the tiny SA Ultra to my Windows 10 laptop. The drivers are installed, and I can see a USB serial device appearing in the device manager. However, when I run tinySA-APP,

Its a clone -- Designer of the tinySA For more info go to https://tinysa.org/wiki/

Dear Erik, I bought a TinySA Ultra at HamGeek Store on AliExpress and the device is failing self test No. 10. I hope you can help me and identify the problem. I updated the SA with the newest

Yes, rename possible I think add "Name" button like "DEL", after enable it, next click on filename - call text input dialog for enter name and after rename it if ok (but leave file extension) need use

I was not actually expecting a programmatic resort and had assumed the underlying core SD i/o would support directory file listing with multiple sort options (like filename, create date, modify date)

@ctech, Here is a link to the source on Github. If you find a way to do sorting within the TinySA memory limits, please submit a pull request. https://github.com/erikkaashoek/tinySA

@DiSlord Guess the file rename should be possible? -- Designer of the tinySA For more info go to https://tinysa.org/wiki/

TinySA contain only 48k RAM, for all I add file browser option in NanoVNA and Tiny. For all I use 4k RAM, shared vs LCD buffer (for all, include read buffers, FAT cache, and small text draw