开云体育

Dear Eric, and all Tinysa users, There have been a number of utube videos now, which show poor performance attributes of the device, without the creators fully understanding it. Some video authors

As all has been explained I suggest we close this topic.

The tinysa is *correctly* labeled. Look at any electrical device, the label specifies the current that the device will pull from the circuit. Look at *any* appliance in your home, it will tell you

One can hear many *incorrect* things on the Internet, this is one of them.

Thanks Erik! Got a nice capture of a low power FM broadcaster near me during a period of no audio modulation. You can clearly see the 19 KHz pilot signal modulation. I see trace smoothing disappeared

Thanks Alain Downloaded the latest version and it works as expected. -- 73 Bob? KD8CGH

Hi Erik, The new version is a definite improvement. Could I suggest that the graph frequency scale is shown along the bottom axis and the marker frequencies are shown along the top (swapped over).

New tinySA-App release Version v1.1.4.6 OneOfEleven has made many improvements in the nanoVNA-App and in this release I synchronized the tinySA-App with those improvements. As there are so many

Hi Bob, The app for windows is on this link page (exe file only). http://athome.kaashoek.com/tinySA/Windows/ It works well with my unit and it was easy to use?the markers facility via this app. I

Oops, typo. Should indeed be "Add marker" and indeed, it works without aligning

Hi John, Great feedback for the community - Thank you. I did my first test this morning on my very advanced work bench (washing machine) and my waveform generator (a Siglent SDG 830). This low cost

You shouldn't need to do anything about aligning anything Erik, to add a marker anywhere on the graph all you need do is either double click inside the graph area (away from other markers) or

Can we look forward to a delta marker functionality soon? ;-) -- John AE5X https://ae5x.blogspot.com/

Move your mouse close to the peak you want the marker on till you see both the vertical and horizontal white lines appear. Then right click "add marker"

How do you add a marker in the app? If I right click I get a pop up menu where I can select "Add marker 1", but I can't seem to add a marker. I've tried left click, double click, shift click, ctrl

I made some measurements of one of my QRP rigs over the past couple of days with an HP-8563A that we have at work, then made the same measurements at home with the tinySA. Very much impressed with the

I have a table that is 74 cm high and can carry 300 kg load. If I put something on this table, it will be at 74 cm height above the floor, regardless of its weight (if it is not more than 300 kg). If

The current drawn by the tinySA is 500mA max, or less if less is needed

Hi Alain and Erik, Thank you both very much for your replies. I have followed all Erik's videos and some of IMSAI Guy so will be continuing to do so. Erik, thank you for the reply to my list of

Dear Gents, I have attached a picture of the label of my TinySA. You can see that the current specification was (wrongly) labelled as "5V USB ( *500mA Max* )". This is the reason of my post/enquiry as