开云体育

Re: Erik: By the way, I introduced the EMC Guru Ken Wyatt to the TinySA Ultra and he published the article linked below. I don't know where he got the $260.00 price tag from or that Kurt Paulson was

Thanks for this. I used to work on some of these wireless devices (Telex) at the factory. This looks like a very useful program. 73 -Jim NU0C "Erik Kaashoek" <erik@...> wrote:

Thank you Erik for all of your amazing work. The fun is in the learning. I am happy to be able to contribute what I can amidst this group of smart people (smarter than I am in many cases). 73 -Jim

I'm glad that you got it worked out! We all learn. :) 73 -Jim NU0C "Enchilada" <finansiel@...> wrote:

Nice job with the fix. It's an amazing instrument is it not? If you drop it while working from a tower or blow it up you aren't out kilobucks either! Enjoy the new toy! Erik: By the way, I introduced

You are the second to report this problem with this test. Will look into it -- For more info on the tinySA go to https://tinysa.org/wiki/

It appears that in additional to preventing any previous version Preset files from being loaded, the new FW release also prevents any previous version Configuration files, and possibly Command files,

While I was writing the previous post, Erik released a new version tinySA4_v1.4-142-ge5dbf70 in which Self Test again passes correctly. The signal generator also works correctly after replace U6

Hello. Finally a few days ago I was able to fix my TinySA Ultra4. Replaced were : U5 - After amateur soldering out it was not suitable for re-soldering. U29 - It got broken for a unknown reason, it

New FW release V1.4142 All models Changes: - Prevent loading incompatible settings from SD card - tinySA basic release brought up to latest revision -- For more info on the tinySA go to

Tnx Erik, my fault - reading DFU and thinking the link point to dfu tools for upload FW but ont the FW self. Markus

A small bug has been solved, please download from here: https://github.com/berkon/wireless-microphone-analyzer/releases -- For more info on the tinySA go to https://tinysa.org/wiki/

https://tinysa.org/wiki/pmwiki.php?n=Main.UpdatingTheFirmware -- For more info on the tinySA go to https://tinysa.org/wiki/

Dear Erik K. sorry to ask, but where to find the new FW 1.4141. I did search under Files and in the SA-Wiki you mentioned. tnx Markus

Temporarily adding an attenuator is a measurement test to determine if overload/compression is occurring.? If the test shows overload/compression is present, then your measurements will be

Indeed, but adding an attenuator is not without consequences to the overall noise floor of the SA and the consequent degradation of signal to noise ratio. Of course you must make sure that the SA is

Thanks guys for reminding me I forgot to increment the version number of the settings data. This would have prevented the problems you got Will create a new release -- For more info on the tinySA go

Hi Jim..I finally managed to sort it out (I thought) but nope gone when I started again, then followed your approach to the teeth, and cleared the SD..and that seems to have done the job. Thanks a

Well I managed to put mine into almost the same state as yours when I loaded a previously known to be working preset. No trace, dBm scale shows 100 to 190, no grid lines, and Corr;OFF in red. And it

For all those who are dealing with wireless microphones, Wireless-Microphone-Analyzer is a very good radio spectrum management software, and now it has released version V2.0, adding support for