开云体育

Ah, Unplug the tinySA, wait for the beep, plug in again, wait for the beep and try again. tinySA.exe may hang in a hidden state waiting in deadlock

Is terrible, my neighbours are using them. I had to put chockes over all the mains electricity cables where they enter my home, including the ground cable. Remember you can do DISPLAY/STORAGE/STORE

Try going into the Device Manager window and under View, select "show hidden devices" Then, have a look for any old STM USB or DFU devices and delete them. Now, connect the SA and let Windows detect

I have just found it works fine on my other Windows 10 PC. Same TinySA, same TinySA.exe. Odd.

Have you tried accessing the SA via a terminal, like TeraTerm? Does it work?

Thanks for clarifying the build number. It happens to me too! I don't think it's that, I have left it for over 15 minutes and nothing happens. By the way, I don't mean the port selection box isn't

Hi All, I thought you may be interested to see the Tiny SA in action when trying to trace some RF interference from a Data over Power line adaptor. The Yellow trace shows the peak hold trace with

Thank you Erik. You have a truly remarkable product. ?TinySA is a game changer. Every high school Science ?Department should purchase a TinySA. ?The product maturity is there now, What a great

Short answer: Yes, but it deserves a long answer. I guess you started from power on. At least I can replicated if I start from power on. Then activate the 10MHz cal output and send to low input. Then

Erik, I noticed the following issue this morning: 1. 10MHz calibrator output connected to LOW input. 2.? Marker->Center places the 10MHz carrier in the center of the display. 3.? Frequency->Span

Hi Erik, That's great. Love the new graticule calibration, it's now so much easier to quickly work out the frequency spacing between signals :-) Thanks again. Martin

Is fixed now

Looks good!? Love how you are constantly working to improve this. -- 73, Michael, KE4EST

Forgot to push the release button Now its there

Erik. Where can I find the update? http://athome.kaashoek.com/tinySA/DFU/ we have v1.0.85 available. Thank you for your work.

New FW release Version V1.0-86 Changes: - Added a frequency per division indicator at the bottom - Increased the minimum number of frequency grid lines to be shown

Thanks Erik, all understood no rush, but maybe is good :-) Regards, Martin

Added to the todo list, this may take some time though (if ever)

It may take some seconds (5 seconds per comm port on your computer)? before the port selection box appears

I added a wiki page on noise factor measurement but as I am no measurement expert I could make some stupid mistakes. Can someone with the right knowledge (on how to measure noise of resistors and the