开云体育

I have a tiny SA and a TinySA Ultra, and I have also used them to try and track down noise sources. In my opinion the Tiny SA does not have sufficient sensitivity, for what you are proposing. As Erik

The NF of the tinySA is 28dB so if you adding a cheap 30dB amplifier will be sufficient For inspiration: https://tinysa.org/wiki/pmwiki.php?n=Main.LNA The tinySA Ultra has an internal LNA with a 4dB

Hi all. first post from a new member... I have an RFI problem which is impacting on several HF bands and I'm trying to track down the source. Functionally, a tinySA looks like the right tool, but I'm

Wiki part on markers is updated as the text was wrong -- For more info on the tinySA go to https://tinysa.org/wiki/

I understand, it's about a black number on a light background. The question is removed.

Hello, Here: https://tinysa.org/wiki/pmwiki.php?n=Main.MARKER I can't understand phrase: "One marker is active and marked with an inverted number." I have never seen inverted numbers on a marker. In

This problem was related to the regional decimal number formatting. The decimal number separator must be a dot and not a comma. Once I changed it, the frequency axis looked fine. Thanks to Vitor for

Thanks for quick reply!

Thanks. Good remark. It's indeed maximum 290. But there is an option to select less sweep points -- For more info on the tinySA go to https://tinysa.org/wiki/

Better: " As the number of points displayed is 290, when the RBW is too small to cover...."

Hello, In the https://tinysa.org/wiki/pmwiki.php?n=Main.FREQ I read the phrase: The number of points scanned is *minimum* 290 but when the RBW ( https://tinysa.org/wiki/pmwiki.php?n=Main.RBW ) is too

Thanks!

Thanks for this. Looks like a wealth of information!

You can use the pause and resume command. When in pause mode a big green PAUSED text is shown in the status window -- For more info on the tinySA go to https://tinysa.org/wiki/

Also, the TinySA will stop his own sweep, when the raw command is sent through the USB/RS232 protocol. Once the raw command finishes its sweep, the TinySA resumes what it was doing. But since my

Hello, Please e-mail me directly with problems regarding my software - this group should be use for the TinySA devices only, as per request from Eric, which I respect. The mentioned problem results

Dieter, try english as? Windows language. Toni.

MARKERS/MODIFY MARKER You can enable up to 8 markers All of them can be auto tracking -- For more info on the tinySA go to https://tinysa.org/wiki/

Kinda new to the tinySA Ultra. Is there a way I can have multiple markers active and labeled on the device? I see 3-5 major spikes on my display with a 30in antenna attached and wonder if they are

LV Zeners make wonderful noise sources. Dave - W?LEV wrote: -- *Dave - W?LEV*